Help; Remote Controller - Orion MLCD OLMU-4620S User Manual

5.10. Help

• In order to move to Orion website, go to"Help" of menu bar "OrionDisplay Home Page"
ORION Homepage Log on
• Go to "Help" of menu bar "Display Model Information"
• Go to "Help" of menu bar "About" to check MSCS
If the light leakage is not detected at 1m from the screen, the panel
C hecking MSC SV ersion
- 58 -

6. Remote Controller

POWER OFF :
Turn off the display
Number Button :
Used to enter the LAN Network
infomation and security password
MENU :
Display OSD MENU
on the screen & ENTER
OK :
Select the Item within
OSD menu
DP :
Select the DP Input source
HDMI 1:
Select the HDMI 1 Input
OPTION 1:
IR Unlock function Key
OPTION 2:
Multi Product Option
( Does not support this function )
※The button without explanation is not working.
Installing Batteries
• Open the battery compartment cover on the back side
and insert the batteries with correct polarity.
• Install two 1.5V alkaline batteries of AAA type. Don't mix
used batteries with new batteries.
POWER ON :
Turn on the display
A.SETUP :
Automatically adjusts White
Level. (RGB Only)
A.ADJ :
Automatically adjusts Screen
Size, Hposition, V position,
Clock, Clock Phase (RGB Only)
A.SETUP :
Automatically adjusts White
Level. (RGB Only)
EXIT :
Returns to previous menu
within OSD menu
▲▼◀▶:
Moves from one menu item to
another horizontally, vertically or
adjusts selected menu values
DVI :
Select the DVI input source
HDMI 2:
Select the HDMI 2 Input source
RGB :
Select the RGB Input source
- 59 -