5.3.3.2. In case of connection to user's computer
n Check the network informations
1. Execute the MSCS.
2. Select Com Port and click the "Connect". Click the "Open New Design".
3. Turn on MLCD.
Click the right button of the mouse on the MLCD that you want to control on the screen configuration window.
(This MLCD should be connected to the LAN cable.)
4. Select "IP LAN IP LAN Configurator or "Ctrl + L" to start Setup.
- 38 -
5. Select the "LAN On" and click "Get TCP/IP" to read the initial network configuration of the MLCD.
6. Input the network information of the user's PC to be identical with MLCD set.
However, the final digit of the IP address must be different.
- 39 -