Orion MLCD OLMU-4620S User Manual page 29

5.9.4. Tracking Control
• Alignment adjustment is available when input source is PC.
• Go to "Control" in menu bar  Tracking Control or press "Ctrl+T" using keyboard to run
"Tracking" window.
• Press "Auto Tracking" button in order to run auto tracking.
• In case alignment doesn't work through "Auto Tracking" command, user can tune finely
through "Manual".
• Manual Tracking enables users to set H Position, V Position, Clock and ClockPhsae.
• Select panel ID which you want to adjust alignment.
• Detail adjustment steps are as follows.
1) Tune "ClockPhase" until the vertical lines are clearly adjusted..
2) Tune "V Position" to adjust vertical alignment. "H Position" for horizontal alignment.
3) Adjust "Clock" if alignment is still wrong.
If you adjust "Clock", repeat step 1) and 2) to fit alignment.
Adjustable range is as follows
-The range of "H Position" you can adjust is 0 to 100
-The range of "V Position" you can adjust is 0 to 100
-The range of "Clock" you can adjust is 0 to 100
-The range of "ClockPhase" you can adjust is 0 to 63
• Click "EXIT" button to close "Tracking" window.
※ When "Tracking" windows is on display, users cannot display "Picture Control" window.
※ Even when "Tracking" window is on display, selecting panel ID is available by clicking right button of
mouse.
Tracking Manual Window
- 54 -
5.9.5. LCD OPT. Control
• Users can configure various additional functions.
• Go to "MSCS Menu"  "Control"  "LCD OPT. Control" to run "LCD OPT Control" window.
• Power On Delay Time : This is the configuration command for Turn on delay time after power on.
• Auto Power : This is the configuration command for automatic power on by AC power connection.
• Color Space : This is the command for configuring color space of Auto, RGB PC, and RGB Video Mode.
• Fan Control : This is the command for configuration of Fan.
• Test Pattern Mode : Display the internal Pattern.
• Frame Compensation : This is the configuration command for compensating the Frame width.
- 55 -