5.9.2. Picture Control
• Register values related to display of MLCD can be changed.
• To use Picture Control, go to MSCS Menu Control Picture Control or press "Ctrl+P" using Keyboard.
• In order to control display values, input values directly in "Edit Box" and press Enter key.
Or click -/+ button using mouse.
• Click "Exit" button to close "Picture Control" window.
• Brightness : The range of "Brightness" you can adjust is 0 to 100.
• Contrast : The range of "Contrast" you can adjust is 0 to 100.
• Sharpness : The range of "Sharpness" you can adjust is 0 to 24.
• Tint : The range of "Tint" you can adjust is -50 to 50.
• Color : The range of "Sharpness" you can adjust is 0 to 100.
• Dimming : The range of "Dimming" you can adjust is 0 to 100
• Color Temp : Change the color temperature of the screen
-3200K, 6500K, 10000K, User
- 52 -
5.9.3. Timer Control
• Users can decide the time of turning on or off MLCD set by timer control.
• To use this function, click Menu Control Timer Control or use 'Ctrl +M' keys from the keyboard.
Timer Control Dialog
• How to set the time of power on or off.
1) Select Hour and Minutes of turn on or off
2) After setting Power On/Off time, click "Add" button to add it to Power On/Off List Box.
You can save up to 10 settings for Power On/Off. Also, you can delete the saved settings in the List Box one by one
with "Remove" button. If you delete all the settings, click "Remove All" button.
3) Select once for one time use and Daily for daily use, then click 'Start'
4) Power on or off signal will be transmitted to MLCD at the time of user set.
• Time Dialog must be activated to use Timer function
- 53 -