Table of Contents
Advertisement
ELECTRIC ADJUST HYDRAULIC VARIABLE SPEED APRON CONTROL
The optional electric adjust valve allows you to adjust your apron speed from the tractor cab if the tractor
is not equipped with a variable speed on the flow control.
MAIN APRON REVERSING VALVE KIT
The optional reversing valve allows the operator to reverse the main apron if a problem arises such as
an obstruction in the beater area
4-WHEEL ELECTRIC-OVER-HYDRAULIC DISC BRAKES
The brake system is electric-over-hydraulic (brake fluid) only. The controller must be located on the
tractor for the brakes to operate. If the tractor is set up with the #4 pin in the seven in plug as being brakes
(per new ASABE standard) it will be activated when the user pushes the brake pedal. The braking force
can be adjusted by pressing the plus or minus on the gain of the controller.
For tractors that do not have this feature, the handset is used to apply the brakes.
ELECTRONIC SCALES & COMPONENTS
Model: Digi-Star GT400
An optional factory installed Digi-Star GT400 scale system is available for accurate weight measurement
of the manure spreader load.
Model: Digi-Star NT560
An optional factory installed Digi-Star NT560 scale system is available for accurate
weight measurement and displaying actual tons per acre. The Indicator has GPS
capability and stores pounds of manure spread on individual fields.
OPTIONAL EQUIPMENT
HYDRAULIC ACTUATOR LIGHT COVERS
The optional light covers are hydraulically linked to the hydraulic
end gate so that when the end gate is raised, the cover closes over
them to protect them from debris. When the end gate is closed, the
light covers open.
-25-
Advertisement
Table of Contents
