Installation - Elation KL FRENSEL 8 User Manual

I N S T A L L A T I O N
DO NOT INSTALL THE FIXTURE IF YOU ARE NOT QUALIFIED TO DO SO!
Fixture MUST be installed following all local, national, and country commercial electrical
and construction codes and regulations.
Before rigging/mounting the fixture to any metal truss/structure or placing the fixture on any
surface, a professional equipment installer MUST be consulted to determine if the metal
truss/structure or surface is properly certified to safely hold the combined weight of the
fixture, clamps, cables, and accessories.
Fixture ambient operating temperature range is
Do not use the fixture under or above this temperature.
Fixture should be installed in areas outside walking paths, seating areas, or away from
areas were unauthorized personnel might reach the fixture by hand.
NEVER stand directly below the fixture when rigging, removing or servicing.
Overhead fixture installation must always be secured with a secondary safety attachment,
such as an appropriately rated safety cable that can hold 10 times the weight of the fixture.
Allow approximately 15 minutes for the fixture to cool down before serving.
POWER LINKING
Max number of fixtures power linked together: 3 units @120V | 6 units @240V
u USE CAUTION WHEN POWER LINKING OTHER FIXTURES TO KL FRESNEL 8 AS
THE POWER CONSUMPTION OF OTHER LIGHTING FIXTURES WILL VARY!
www.elationlighting.com
F L A M M A B L E M A T E R I A L W A R N I N G
Keep fixture at least 5.0 feet (1.5m) away from any
flammable materials, decorations, pyrotechnics, etc.
E L E C T R I C A L C O N N E C T I O N S
A q ua l i fi e d e l e c tr i ci a n s h o ul d b e u s ed f or a l l
el ec tr i c al c o n n ec t i o n s a n d/ or i n s t a l l at i o n s .
14° to 113°F. (-10° to 45°C)
10