HMS Networks Anybus Communicator PROFINET to EtherCAT MDevice User Manual page 62

® ™
Anybus Communicator - PROFINET to EtherCAT MDevice
3. While holding the reset button, reconnect the Communicator to power.
Figure 54. Hold Reset button and reconnect power
4. Release the reset button.
The Communicator enters exception state.
5. Reboot the Communicator.
Result
When the Communicator has successfully rebooted, the Communicator configuration is reset to the factory
default configuration or the current configuration after firmware upgrade.
To Do Next
To ensure that the Communicator built-in web-interface is synchronized.
1. Open the the Communicator built-in web interface.
2. Navigate to the Files & firmware page and click Revert.
Figure 55. Files & firmware, Revert
Page 58 of 62
Reset to Factory Settings
SCM-1202-213 Version 1.0