Reset To Factory Settings - HMS Networks Anybus Communicator PROFINET to EtherCAT MDevice User Manual

Reset to Factory Settings

11.2. Reset to Factory Settings
Before You Begin
If the Firmware has been updated, factory reset will revert the Communicator configuration to initial state after
the update.
Procedure
To reset the Communicator:
1. Disconnect the Communicator from power.
Figure 52. Disconnect power
2. Use a pointed object, such as a ballpoint pen to press and hold the Reset button.
Figure 53. Press and hold Reset button
SCM-1202-213 Version 1.0
® ™
Anybus Communicator - PROFINET to EtherCAT MDevice
Page 57 of 62