Apply Configuration - HMS Networks Anybus Communicator PROFINET to EtherCAT MDevice User Manual

Apply Configuration

7.9. Apply Configuration
Before You Begin
NOTE
When you apply the configuration, any existing configuration is overwritten.
Figure 36. Disconnect the Communicator from the networks
Before you can apply the configuration, ensure that there is no active communication on the PROFINET network
where the Communicator is connected.
Procedure
To make the settings take effect, download the configuration to the Communicator:
1. In the web-interface header, click Apply
2. To confirm download, click Apply.
The configured settings are downloaded and applied to the system.
SCM-1202-213 Version 1.0
® ™
Anybus Communicator - PROFINET to EtherCAT MDevice
Page 41 of 62