I/O Data Map - HMS Networks Anybus Communicator PROFINET to EtherCAT MDevice User Manual

® ™
Anybus Communicator - PROFINET to EtherCAT MDevice

I/O Data Map

7.7. I/O Data Map
Figure 27. I/O data map page
On the I/O data map page the data communication between the EtherCAT and the PROFINET network is
mapped.
The allocated I/O area is auto-generated based on the scanned EtherCAT network node(s) configuration and how
the settings on the PROFINET page are configured.
There are two areas: From EtherCAT SubDevices to PROFINET and To EtherCAT SubDevices from PROFINET.
I/O Size Settings
By default, the Communicator is set to use the same I/O sizes for both the PROFINET network and the EtherCAT
SubDevices.
To configure different sizes for the networks, deselect the Automatically adjust the I/O sizes checkbox and enter
the desired sizes.
Page 34 of 62 SCM-1202-213 Version 1.0