To Configure Ip Settings Manually - HMS Networks Anybus Communicator PROFINET to EtherCAT MDevice User Manual

High Level Network Settings

7.6.2. To Configure IP Settings Manually

Figure 24. IP Settings, DCHP disabled
1. Ensure that the DHCP enabled checkbox is deselected.
2. Configure the IP settings.
Setting
IP address
Subnet mask
Gateway address
Primary DNS
Secondary DNS
Hostname
Station name
SCM-1202-213 Version 1.0
Description
The PROFINET network IP address in IPv4 dot-decimal notation
The PROFINET network Subnet mask in IPv4 dot-decimal notation.
The PROFINET network Gateway address in IPv4 dot-decimal notation.
If there is no gateway available, set the Gateway address to: 0.0.0.0
The PROFINET network Primary DNS in IPv4 dot-decimal notation.
The PROFINET network Secondary DNS in IPv4 dot-decimal notation.
You can label the Communicator. Maximum length is 64 characters. No symbol characters,
punctuation characters, or whitespace are permitted. Write the Hostname as one single word.
To identify the Communicator in the PROFINETnetwork, enter a Station name. Maximum length is
240 characters. No symbol characters, punctuation characters, or whitespace are permitted. Write
the Station name as one single word.
® ™
Anybus Communicator - PROFINET to EtherCAT MDevice
Page 31 of 62