Connect To Ethercat Network - HMS Networks Anybus Communicator PROFINET to EtherCAT MDevice User Manual

® ™
Anybus Communicator - PROFINET to EtherCAT MDevice

6.3. Connect to EtherCAT Network

Figure 9. Connect to EtherCAT network
1. Connect the Communicator upper EtherCAT port X3.1 (A) to your EtherCAT network.
NOTE
The Communicator lower EtherCAT port X3.2 (B) is reserved for future use, do not use.
EtherCAT Connector
To Do Next
Connect the Communicator to the PROFINET network and to power.
Check LED status, refer to Communicator LED
Page 14 of 62
Pin
1
2
3
4
5
6
7
8
Indicators.
Connect to EtherCAT Network
Description
TD+
TD-
RD+
Not used
Not used
RD-
Not used
Not used
SCM-1202-213 Version 1.0