High Level Network Settings; To Use Dhcp Server - HMS Networks Anybus Communicator PROFINET to EtherCAT MDevice User Manual

® ™
Anybus Communicator - PROFINET to EtherCAT MDevice

7.6. High Level Network Settings

Configure the PROFINET network settings.

7.6.1. To Use DHCP Server

Figure 23. IP Settings, DHCP enabled
By default, DHCP is disabled.
Default Communicator IP Settings
The Communicator comes with the following factory default IP settings:
Setting
DHCP
IP address
Subnet mask
Gateway address
Primary DNS server
Secondary DNS server
Hostname
Page 30 of 62
Default value
Off
192.168.0.10
255.255.255.0
There is no default Gateway address.
There is no default Primary DNS server.
There is no default Secondary DNS server.
You can label the Communicator. Maximum length is 64 characters. No symbol characters,
punctuation characters, or whitespace are permitted. Write the Hostname as one single word.
High Level Network Settings
SCM-1202-213 Version 1.0