Table of Contents
Advertisement
Access the Built-In Web Interface From a Web Browser
7.3. Access the Built-In Web Interface From a Web Browser
Before You Begin
NOTE
The Communicator configuration port default IP address is 192.168.0.10.
NOTE
To access the Communicator built-in web interface, ensure that Port 80 TCP is open in your Firewall.
This applies to any Firewall between the web browser and the gateway.
NOTE
When you change to a static IP address on your computer, internet access may be lost.
Procedure
1.
On the PC accessing the Communicator built-in web interface, set a static IP address within the same IP
address range as the Communicator IP address.
2.
Open a web browser.
3.
Click to select the Address bar and enter the Communicator IP address.
4.
To open the built-in web interface Home page, press Enter.
SCM-1202-213 Version 1.0
®
™
Anybus
Communicator
- PROFINET to EtherCAT MDevice
Page 25 of 62
Advertisement
Table of Contents
