Ethercat Mdevice Settings; Cycle Time Settings - HMS Networks Anybus Communicator PROFINET to EtherCAT MDevice User Manual

® ™

EtherCAT MDevice Settings

Anybus Communicator - PROFINET to EtherCAT MDevice
7.5. EtherCAT MDevice Settings

7.5.1. Cycle Time Settings

Figure 18. Communication page, Cycle time
Specify how often data is exchanged.
A lower cycle time results in reduced latency and jitter but increased network load.
• The default Cycle time is 8 ms.
• Minimum cycle time: 1 ms
• Maximum cycle time: 128 ms
SCM-1202-213 Version 1.0 Page 27 of 62