Listening Mode - Integra DRX-2.1 Basic Manual

> Before Start > Part Names

Listening Mode

This unit is equipped with a variety of
listening modes, and you can select the
optimum listening mode for movies, TV,
music, and games using Movie/TV, Music,
and Game (b). The basic operations are
introduced in the Basic Manual. For more
details, see the Advanced Manual.
0 The listening mode last selected for the
source is remembered for each of the
Movie/TV, Music, and Game buttons. If
content you play is not supported by the
listening mode you selected last, the
listening mode that is standard for that
content is selected automatically.
30
> Install > Initial Setup
Dolby Digital/DTS Modes
When the input signal is a digital surround
format such as Dolby Digital or DTS, you
can select the listening mode that suits the
input signal. Dolby Digital is displayed for
Dolby Digital and DTS-HD Master Audio is
displayed for DTS-HD Master Audio. The
output is Stereo for 2-channel input signals.
Direct
This listening mode can be selected for all
input signals. It shuts down processing that
affects sound quality to deliver a playback
sound quality closer to sources. Speakers
play the sound field according to the
number of channels in the input signal, so
there would be output from only the front
a
speakers for a 2 ch signal, for example.
Note that the sound quality cannot be
adjusted if this mode is selected.
Dolby Surround/DTS Neural:X
These listening modes allow you to expand
the playback signal to 5.1 channels or
7.1 channels to suit the connected speaker
configuration when the input signal is
2 channels or 5.1 channels.
b
Original Surround Modes
You can select listening modes such as the
All Ch Stereo mode where a stereo image
is played from both the front and the rear,
and Orchestra (only with the Music button)
which is best for playback of classical and
opera pieces.
> Playback
Checking the Input Format and
Listening Mode
Press (a) on the remote controller
several times to switch the display of the
main unit as follows.
Input source & volume
Listening mode
Signal format
The display changes few
seconds later.
Sampling frequency
Input signal resolution
> Advanced Manual
Troubleshooting | Supplementary Information, etc.