Table of Contents
Advertisement
> Before Start
> Part Names
Part Names
Part Names
Front Panel
1. Í On/Standby button
2. Hybrid Standby indicator: Lights if the unit enters standby mode when the features are
enabled that continue to work when this unit is in standby, such as HDMI Standby
Through and Network Standby.
3. You can adjust the sound quality of the front speakers. Press Tone to select the desired
setting from "Bass" and "Treble", and adjust with + and –.
4. Remote control sensor: Receives signals from the remote controller.
0 The signal range of the remote controller is within about 16´/5 m, at an angle of 20° on
the perpendicular axis and 30° to either side.
5. Listening Mode button: Press the Listening Mode button (above) repeatedly to select a
category from "Movie/TV", "Music", "Game", then turn the Listening Mode dial (below) to
change the mode (P30). (*)
> Install
> Initial Setup
> Playback
6. Display (P4)
7. Dimmer button: You can adjust the brightness of the display in three steps. It cannot be
turned off completely.
8. Memory button: Used to register AM/FM radio stations (P28).
9. Tuning Mode button: Switches the tuning mode (P27).
10.Info button: Switches the information on the display (P30).
11. Setup button: You can show advanced setting items on the TV and display to provide you
with an even better experience. (*)
12.Cursor buttons (
press Enter to confirm. Use them to tune to stations when using Tuner.
13.Return button: Returns the display to the previous state.
14.Master Volume
> Advanced Manual
Troubleshooting | Supplementary Information, etc.
(*)You can find details in the Advanced Manual.
/
/
/
) and Enter button: Select the item with the cursors and
En
3
Advertisement
Chapters
Table of Contents
