Integra DRX-3.2 Instruction Manual
  1. Manuals
  2. Brands
  3. Integra Manuals
  4. Stereo Receiver
  5. DRX-3.2
  6. Instruction manual

Integra DRX-3.2 Instruction Manual

Hide thumbs Also See for DRX-3.2:
Table of Contents

Advertisement

Quick Links

DRX-3.2
AV RECEIVER
Instruction Manual
En
Table of contents
Connections
- Connecting Speakers
Playback
Setup
Troubleshooting
Appendix
Supplementary Information
Front Panel≫ Rear Panel≫ Remote≫
≫
≫
≫
≫
≫
≫
≫
≫

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DRX-3.2 and is the answer not in the manual?

Questions and answers

Related Manuals for Integra DRX-3.2

Summary of Contents for Integra DRX-3.2

  • Page 1 ≫ Table of contents ≫ Connections ≫ - Connecting Speakers DRX-3.2 AV RECEIVER ≫ Playback ≫ Setup ≫ Troubleshooting Instruction Manual ≫ Appendix ≫ Supplementary Information Front Panel≫ Rear Panel≫ Remote≫...

  • Page 2: Table Of Contents

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ What’s in the box Connecting a TV (ZONE 2) Part Names Connecting a Pre-main Amplifier (ZONE 2) Front Panel Connecting Antennas Network Connection Display Rear Panel Connecting External Control Devices Remote Controller IR IN/OUT port Connections 12V TRIGGER OUT jack...
  • Page 3 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Listening Mode Playing Back USB Storage Device Selecting a Listening mode Basic Operations Listening Mode Effects Device and Supported Format Selectable listening modes Setup Playing back files on a PC and NAS (Music Server) Windows Media Player settings ®...

  • Page 4: Troubleshooting

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Updating the Firmware via Network Updating via USB Initial Setup with Auto Start-up Wizard Operations Troubleshooting When the unit is operating erratically Troubleshooting Appendix About HDMI General Specifications Front Panel≫ Rear Panel≫ Remote≫...

  • Page 5: What's In The Box

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ What’s in the box 1. Main unit (1) 2. Remote controller (RC-912R) (1), Batteries (AAA/R03) (2) 3. Speaker setup microphone (1) • Used during Initial Setup. 4. Indoor FM antenna (1) 5. AM loop antenna (1) 6.

  • Page 6: Part Names

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Part Names Front Panel 7 8 9 bkbl bpbq br bs ❏ For details, see ( Front Panel≫ Rear Panel≫ Remote≫...
  • Page 7 Contents Connections Playback Setup ≫ ≫ ≫ ≫ On/Standby button 2. Hybrid Standby indicator: Lights if the unit enters standby mode when the functions such as HDMI Standby Through and Network Standby that work in standby are enabled. 3. You can adjust the sound quality of the speakers. Press the Tone button to select an item to adjust from "Bass"...

  • Page 8: Display

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Display 1. Speaker/Channel display: Displays the output channel that corresponds to the 5. Blinks when muting is on. selected listening mode. 6. Displays various information of the input signals. 2. Lights in the following conditions. 7.

  • Page 9: Rear Panel

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Rear Panel ❏ For details, see ( p10) Front Panel≫ Rear Panel≫ Remote≫...
  • Page 10 Contents Connections Playback Setup ≫ ≫ ≫ ≫ 1. DIGITAL IN OPTICAL/COAXIAL jacks: Input TV or AV component digital audio signals with a digital optical cable or digital coaxial cable. 2. TUNER AM/FM terminal: Connect the supplied antennas. 3. COMPONENT VIDEO IN jacks: Input AV component video signals with a component video cable.

  • Page 11: Remote Controller

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Remote Controller On/Standby button 2. Input selector buttons: Switches the input to be played. 3. Q (Quick Menu) button: Pressing this button during playback can make settings such as "Tone" and "Level" quickly on the TV screen while playing. p136) 4.

  • Page 12: Connections

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connections Connecting speakers Connecting the TV Connecting Playback Devices Connecting an AV Component in a Separate Room (Multi-zone Connection) Connecting Antennas Network Connection Connecting External Control Devices Connecting the Power Cord Front Panel≫ Rear Panel≫ Remote≫...

  • Page 13: Connecting Speakers

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting speakers You can select the layout of speakers to be installed from various patterns when using this unit. Use the following flow chart to select the speaker layout that suits your speakers and usage environment.

  • Page 14: Speaker Installation

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Speaker Installation „ 5.1 Channel System This is a basic 5.1 Channel System. Front speakers output the front stereo sound, and a center speaker outputs the sound of the center of the screen, such as dialogs and vocals.
  • Page 15 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 7.1 Channel System This is a 7.1 Channel System that consists of the basic 5.1 Channel System p14) and added surround back speakers. Front speakers output the front stereo sound, and a center speaker outputs the sound of the center of the screen, such as dialogs and vocals.
  • Page 16 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 5.1.2 Channel System A 5.1.2 Channel System is a speaker layout consisting of the basic 5.1 Channel System ( p14) and added height speakers. Select the height speakers that suit your speakers and usage environment from the following three types. ❏...
  • Page 17 Contents Connections Playback Setup ≫ ≫ ≫ ≫ ❏ Front High Speakers/Rear High Speakers This is a system with the basic 5.1 channel system ( p14) consisting of front speakers, a center speaker, surround speakers and a powered subwoofer, and Installation Example added front high speakers or rear high speakers combined.
  • Page 18 Contents Connections Playback Setup ≫ ≫ ≫ ≫ ❏ Ceiling Speakers Installation Example This is a system with the basic 5.1 channel system ( p14) consisting of front speakers, a center speaker, surround speakers and a powered subwoofer, and added top front speakers or top middle speakers or top rear speakers combined. By installing such height speakers, when the input format is Dolby Atmos, you can select the Dolby Atmos listening mode which realizes the most up-to-date 3D sound including overhead sound.
  • Page 19 Contents Connections Playback Setup ≫ ≫ ≫ ≫ ❏ Dolby Enabled Speakers (Dolby Speakers) This is a system with the basic 5.1 channel system ( p14) consisting of front speakers, a center speaker, surround speakers and a powered subwoofer, and Installation Example added Dolby enabled speakers (front) or Dolby enabled speakers (surround) combined.
  • Page 20 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 7.1.2 Channel System A 7.1.2 Channel System is a speaker layout consisting of the 7.1 Channel System ( p15) and added height speakers. Select the height speakers that suit your speakers and usage environment from the following three types. ❏...
  • Page 21 Contents Connections Playback Setup ≫ ≫ ≫ ≫ ❏ Front High Speakers/Rear High Speakers This is a system with the 7.1 channel system ( p15) consisting of front speakers, a center speaker, surround speakers, surround back speakers and Installation Example a powered subwoofer, and added front high speakers or rear high speakers combined.
  • Page 22 Contents Connections Playback Setup ≫ ≫ ≫ ≫ ❏ Ceiling Speakers Installation Example This is a system with the 7.1 channel system ( p15) consisting of front speakers, a center speaker, surround speakers, surround back speakers and a powered subwoofer, and added top front speakers or top middle speakers or top rear speakers combined.
  • Page 23 Contents Connections Playback Setup ≫ ≫ ≫ ≫ ❏ Dolby Enabled Speakers (Dolby Speakers) This is a system with the 7.1 channel system ( p15) consisting of front speakers, a center speaker, surround speakers, surround back speakers and a Installation Example powered subwoofer, and added Dolby enabled speakers (front), Dolby enabled speakers (surround) or Dolby enabled speakers (surround back) combined.
  • Page 24 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 5.1.4 Channel System A 5.1.4 Channel System is a speaker layout combining 2 sets of the height speakers, 1 set of left and right at the front and 1 set of left and right at the rear, to the basic 5.1 Channel System ( p14).
  • Page 25 Contents Connections Playback Setup ≫ ≫ ≫ ≫ ❏ Combination example when Top Front (Example 1) Use top rear speakers at the rear Speakers are used at the front About the top front speakers *2: 125° to 150° The top rear speakers are installed on the ceiling at rear of the listening position, and the width between the left and right speakers is optimal to match the one for the front speakers.
  • Page 26 Contents Connections Playback Setup ≫ ≫ ≫ ≫ (Example 3) Use Dolby Enabled Speakers (Surround) at the rear The Dolby enabled speakers are the special speaker that the sound is emitted toward the ceiling, and have the effect the sound to come from above by reflecting the sound on the ceiling.
  • Page 27 Contents Connections Playback Setup ≫ ≫ ≫ ≫ ❏ Combination example when Top Middle Use rear high speakers at the rear Speakers are used at the front About the top middle speakers 3´ (0.9 m) or more The width between the rear high speakers should match the one for the front speakers, and they should be installed minimum of 3’/0.9 m higher than the front speakers, and tilted so they will point toward the listener.
  • Page 28 Contents Connections Playback Setup ≫ ≫ ≫ ≫ ❏ Combination example when Front High (Example 1) Use rear high speakers at the rear Speakers are used at the front   About the front high speakers   3´ (0.9 m) or more The width between the rear high speakers should match the one for the front 3´...
  • Page 29 Contents Connections Playback Setup ≫ ≫ ≫ ≫ (Example 3) Use top rear speakers at the rear     *4: 125° to 150° The top rear speakers are installed on the ceiling at rear of the listening position, and the width between the left and right speakers is optimal to match the one for the front speakers.
  • Page 30 Contents Connections Playback Setup ≫ ≫ ≫ ≫ ❏ Combination example when Dolby Enabled (Example 1) Use top rear speakers at the rear Speakers (Front) are used at the front About the Dolby enabled speakers (front) *3: 125° to 150° The top rear speakers are installed on the ceiling at rear of the listening position, and the width between the left and right speakers is optimal to match the one for the front speakers.
  • Page 31 Contents Connections Playback Setup ≫ ≫ ≫ ≫ (Example 3) Use Dolby Enabled Speakers (Surround) at the rear The Dolby enabled speakers are the special speaker that the sound is emitted toward the ceiling, and have the effect the sound to come from above by reflecting the sound on the ceiling.

  • Page 32: Speaker Connections And "Speaker Setup" Settings

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Speaker Connections and "Speaker Setup" Settings Connections Make correct connection between the unit's jacks and speaker's jacks (+ side to + side, and - side to - side) for each channel. If the connection is wrong, a bass „...
  • Page 33 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Connect the Subwoofer a Subwoofer cable Connect a powered subwoofer with this unit using a subwoofer cable. Up to two powered subwoofers can be connected. The same signal is output from each SUBWOOFER PRE OUT jack.
  • Page 34 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 5.1 Channel System "Speaker Setup" settings during „ Initial Setup ( p145) Speaker Setup Speaker Channels 5.1 ch < > Subwoofer Height 1 Speaker Height 2 Speaker Zone Speaker Bi-Amp Select how many speakers you have. Next •...
  • Page 35 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 5.1 Channel System + ZONE SPEAKER MAIN ROOM "Speaker Setup" settings during „ Initial Setup ( p145) Speaker Setup Speaker Channels 5.1ch < > Subwoofer Height 1 Speaker Height 2 Speaker Zone Speaker Zone 2 Bi-Amp...
  • Page 36 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 5.1 Channel System (Bi-Amping the Speakers) "Speaker Setup" settings during „ Initial Setup ( p145) Speaker Setup Speaker Channels 5.1 ch < > Subwoofer Height 1 Speaker Height 2 Speaker Zone Speaker Bi-Amp Select how many speakers you have.
  • Page 37 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 7.1 Channel System "Speaker Setup" settings during „ Initial Setup ( p145) Speaker Setup Speaker Channels 7.1 ch < > Subwoofer Height 1 Speaker Height 2 Speaker Zone Speaker Bi-Amp Select how many speakers you have. Next •...
  • Page 38 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 7.1 Channel System + ZONE SPEAKER MAIN ROOM "Speaker Setup" settings during „ Initial Setup ( p145) Speaker Setup Speaker Channels 7.1 ch < > Subwoofer Height 1 Speaker Height 2 Speaker Zone Speaker Zone 2 Bi-Amp...
  • Page 39 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 7.1 Channel System(Bi-Amping the Speakers) "Speaker Setup" settings during „ Initial Setup ( p145) Speaker Setup Speaker Channels 7.1 ch < > Subwoofer Height 1 Speaker Height 2 Speaker Zone Speaker Bi-Amp Select how many speakers you have.
  • Page 40 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 5.1.2 Channel System "Speaker Setup" settings during „ Initial Setup ( p145) Speaker Setup Speaker Channels 5.1.2 ch < > Subwoofer Height 1 Speaker Front High Height 2 Speaker Zone Speaker Bi-Amp Select how many speakers you have.
  • Page 41 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 5.1.2 Channel System + ZONE SPEAKER MAIN ROOM "Speaker Setup" settings during „ Initial Setup ( p145) Speaker Setup Speaker Channels 5.1.2 ch < > Subwoofer Height 1 Speaker Height 2 Speaker Front High Zone Speaker Zone 2...
  • Page 42 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 5.1.2 Channel System(Bi-Amping the Speakers) "Speaker Setup" settings during „ Initial Setup ( p145) Speaker Setup Speaker Channels 5.1.2 ch < > Subwoofer Height 1 Speaker Height 2 Speaker Front High Zone Speaker Bi-Amp Select how many speakers you have.
  • Page 43 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 7.1.2 Channel System "Speaker Setup" settings during „ Initial Setup ( p145) Speaker Setup Speaker Channels 7.1.2 ch < > Subwoofer Height 1 Speaker Front High Height 2 Speaker Zone Speaker Bi-Amp Select how many speakers you have.
  • Page 44 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 5.1.4 Channel System "Speaker Setup" settings during „ Initial Setup ( p145) Speaker Setup Speaker Channels 5.1.4 ch < > Subwoofer Height 1 Speaker Top Middle Height 2 Speaker Rear High Zone Speaker Bi-Amp Select how many speakers you have.

  • Page 45: Speaker Combinations

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Speaker combinations • Up to two powered subwoofers can be connected in either combination. ZONE 2 (*1) ZONE 3 (*1) Speaker SURROUND FRONT CENTER SURROUND HEIGHT 1 HEIGHT 2 Bi-AMP (*1) (ZONE (ZONE Channels BACK...

  • Page 46: Connecting The Tv

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting the TV Connect this unit between a TV and AV component. Connecting this unit with the TV can output the video and audio signals of the AV component to the TV, or play the audio of the TV on this unit.

  • Page 47: To Arc Tv

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ To ARC TV If the TV supports the ARC (Audio Return Channel) function (*), use only the HDMI cable to connect with the TV. Use the ARC-compatible HDMI IN jack of the TV for connection.

  • Page 48: To Non-Arc Tv

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ To Non-ARC TV If the TV does not support the ARC (Audio Return Channel) function (*), connect an HDMI cable and digital optical cable. If the TV does not have a DIGITAL OPTICAL OUT jack, you can use an analog audio cable to connect with the AUDIO IN TV jack.

  • Page 49: Connecting Playback Devices

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting Playback Devices Connecting an AV Component with HDMI Jack Mounted This is a connection example of an AV component equipped with an HDMI jack. When connecting with an AV component that conforms to the CEC (Consumer Electronics Control) standard, you can use the HDMI CEC function (*) that enables linking with input selectors, etc.

  • Page 50: Connecting An Av Component Without Hdmi Jack Mounted

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting an AV Component without HDMI Jack Mounted This is a connection example of an AV component unequipped with an HDMI jack. Select cables that match the jacks of the AV component for connection. For example, when video input is connected to the BD/DVD jack, connect the audio input to BD/DVD jack, too.

  • Page 51: Connecting An Audio Component

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting an Audio Component This is a connection example of an audio component. Connect a CD player using a digital optical cable or analog audio cable. You can also connect a turntable that has an MM-type cartridge to the PHONO jack.

  • Page 52: Connecting A Video Camera, Etc

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting a Video Camera, etc. Connect a video camera, etc. to the AUX Input HDMI jack on the front panel using an HDMI cable. Video camera a HDMI cable Front Panel≫ Rear Panel≫ Remote≫...

  • Page 53: Connecting An Av Component In A Separate Room (Multi-Zone Connection)

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting an AV Component in a Separate Room (Multi-zone Connection) Connecting a TV (ZONE 2) While a disc is played on a Blu-ray Disc player in the main room (where this unit is located), you can play the video and audio of the same Blu-ray Disc player or another AV component on the TV equipped with an HDMI IN jack in a separate room (ZONE 2).

  • Page 54: Connecting A Pre-Main Amplifier (Zone 2)

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting a Pre-main Amplifier (ZONE 2) You can enjoy 2-ch audio in the separate room (ZONE 2) while performing 7.1-ch playback in the main room (where this unit is located). Use an analog audio cable to connect the ZONE 2 PRE/LINE OUT jack of this unit and the LINE IN jack of the pre-main amplifier or power amplifier in the separate room.

  • Page 55: Connecting Antennas

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting Antennas Connect the antenna to this unit, and set up the antenna at the best position for listening while receiving radio signals. Attach the indoor FM antenna to the wall using push pins or adhesive tape. (North American (Australian and models)

  • Page 56: Network Connection

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Network Connection This unit can be connected to the network using a wired LAN or Wi-Fi (wireless LAN). You can enjoy network functions such as Internet radio by network connection. If connection is made by the wired LAN, connect the router and the ETHERNET jack with the LAN cable as shown in the illustration.

  • Page 57: Connecting External Control Devices

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting External Control Devices IR IN/OUT port When connecting a remote control receiver unit consisting of an IR Receiver, etc. to this unit, operation using the remote controller is possible even if the remote control signal is difficult to reach (due to installation in the cabinet, etc.).

  • Page 58: Trigger Out Jack

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ 12V TRIGGER OUT jack When connecting a device equipped with a TRIGGER IN jack such as a BD/DVD player to this unit, the device can be turned on or set to standby by interlocking the operation on this unit.

  • Page 59: Connecting The Power Cord

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting the Power Cord Connect the power cord after all the connections are completed. • This unit includes a removable power cord. Be sure to connect the power cord to the AC INLET of the unit first, and then connect it to the outlet. Always disconnect the outlet side first when disconnecting the power cord.

  • Page 60: Playback

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Playback AV Component Playback BLUETOOTH Playback ® Internet Radio Spotify AirPlay ® DTS Play-Fi ® FlareConnect USB Storage Device Playing back files on a PC and NAS (Music Server) Play Queue Listening To the AM/FM Radio Multi-zone Convenience functions Listening Mode...

  • Page 61: Av Component Playback

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ AV Component Playback You can play the audio from AV components, such as Blu-ray disc players through this unit. • When a TV is connected to the HDMI OUT SUB jack, press Q, and select "Other" - "HDMI Out" to switch between MAIN and SUB. Basic Operations Perform the following procedure when this unit is on.

  • Page 62: Bluetooth Playback

    If a password is requested, enter "0000". • This unit is displayed as "Integra DRX-3.2 XXXXXX". This display can be changed with the Friendly Name function ( p121) or the Integra Control Pro (can be used with the iOS or Android™).

  • Page 63: Internet Radio

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Internet Radio By connecting this unit to an Internet-connected network, you can enjoy Internet radio services, such as TuneIn Radio, etc. • To play Internet radio services, the network needs to be connected to the Internet. •...
  • Page 64 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Internet Radio Service Menu You can bookmark specific stations, or delete stations that have been bookmarked. The displayed menu varies according to the service being selected. The menu icon is displayed while a station is being played. When only this icon is displayed, pressing Enter will display the menu on the screen.

  • Page 65: Spotify

    ZONE speaker terminals or when the volume of the audio device in a separate room is configured so that its volume can be adjusted on Integra DRX-3.2 XXX Devices Available this unit. In any other cases, adjust the volume on the audio device placed in a separate room.

  • Page 66: Airplay

    Confirm that this unit and the PC are connected to the same network beforehand. Then, press NET on this unit. Next, click the AirPlay icon iTunes, select this unit from the displayed devices, and start play of a music file. iPhone Integra DRX-3.2 XXXXXX e.g., iOS 10 Front Panel≫ Rear Panel≫ Remote≫...

  • Page 67: Dts Play-Fi

    "Group playback" that plays the same music in separate • To use a music streaming distribution service, user registration may be rooms at home. To enjoy this function, download Integra Music Control App required. (available on iOS or Android™).

  • Page 68: Flareconnect Tm

    ≫ ≫ FlareConnect When downloading Integra Control Pro (available on iOS or Android™) to mobile devices, such as a smartphone and tablet, you can enjoy the group playback that plays the same music on multiple audio products supporting the FlareConnect function.
  • Page 69 Contents Connections Playback Setup ≫ ≫ ≫ ≫ USB Storage Device You can play music files stored on a USB storage device. Basic Operations Perform the following procedure when this unit is on. 1. Switch the input on the TV to the input connected to the unit. TV’s REMOTE 2.
  • Page 70 Contents Connections Playback Setup ≫ ≫ ≫ ≫ • To return to the previous screen, press • To display an album title, artist name and album art of a file in WAV format, make the folder structure and file names as shown below when saving music files.
  • Page 71 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Device and Supported Format USB Storage Device Requirements WAV (.wav/.WAV): WAV files contain uncompressed PCM digital audio. • This unit can use USB storage devices that comply with the USB mass • Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, storage class standard.
  • Page 72 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Playing back files on a PC and NAS (Music Server) Streaming play of music files stored on PCs or NAS devices connected to the same network as this unit is supported. • The network servers supported by this unit are PCs that incorporate players equipped with the server functions such as Windows Media Player 11 or 12, or NASes ®...
  • Page 73 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Playing Back Perform the following procedure when this unit is on. 1. Switch the input on the TV to the input connected to the unit. TV’s REMOTE 2. Start the server (Windows Media Player 11, Windows Media Player 12, or ®...
  • Page 74 Contents Connections Playback Setup ≫ ≫ ≫ ≫ 6. Select the target server with the cursors, and press Enter to display the items Player 12, it must be configured beforehand. list screen. Setting PC • This unit cannot access pictures and videos stored on servers. 1.
  • Page 75 Contents Connections Playback Setup ≫ ≫ ≫ ≫ – It is playing a music file on a USB storage device. • Depending on the version of Windows Media Player, the names of items to ® select may differ from the above description. ❏...
  • Page 76 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Supported Audio Formats This unit supports the following music file formats. Remote play of FLAC and Apple Lossless (.m4a/.mp4/.M4A/.MP4): DSD is not supported. • Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz •...
  • Page 77 Or, select the "NET" input, and tap the "USB" icon or "Music Server" icon. (Depending on the model, the icon names may be different.) When downloading Integra Control Pro (available on iOS or Android™) to mobile devices, such as a smartphone and tablet, you can save your favorite playlist...
  • Page 78 Contents Connections Playback Setup ≫ ≫ ≫ ≫ • If there are no tracks on the Play Queue list, only "Play Now " is 3. To delete a track, slide the track to the left until the trash icon changes to " ".
  • Page 79 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Listening To the AM/FM Radio You can receive AM and FM radio stations on this unit with the built-in tuner. Tuning into a Radio Station Perform the following procedure when this unit is on. Tuning Automatically 1.
  • Page 80 Contents Connections Playback Setup ≫ ≫ ≫ ≫ When FM broadcasts reception is poor: Perform the procedure for "Tuning Manually" ( p80). Note that if you tune manually, the reception for FM broadcasts will be monaural rather than stereo, irrespective of the sensitivity of the reception.
  • Page 81 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Presetting a Radio Station Registration Procedure You can preset up to 40 of your favorite AM/FM radio stations. After tuning in to the AM/FM radio station you want to register, perform the following procedure.
  • Page 82 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Selecting a Preset Radio Station 1. Press Tuner. 2. Press the cursors to select a preset number. Deleting a Preset Radio Station 1. Press Tuner. 2. Press the cursors to select the preset number to delete. 3.
  • Page 83 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Using RDS (Australian and Asian models) RDS stands for Radio Data System, and is a method of transmitting data in FM characters. This is not a malfunction. Also, if the signal from a station is weak, radio signals.
  • Page 84 "BLUETOOTH". You cannot select different stations of AM/FM broadcasts for the main room and separate room. Integra Control Pro is useful for the multi-zone playback operation. Download Integra Control Pro (available on iOS or Android™) to a mobile device, such as a smartphone and tablet to use it.
  • Page 85 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Switch remote control mode (Zone 2) At the time of purchase, the remote controller is in the mode to control playback Setting the ZONE in the main room. To play a source in ZONE 2, set the remote controller to the control mode (ZONE 2) ZONE control mode (ZONE 2).
  • Page 86 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Switch remote control mode (Zone 3) At the time of purchase, the remote controller is in the mode to control playback Setting the ZONE in the main room. Settings are required to playback a source in ZONE 3. Set control mode (ZONE 3) "2.Speaker"...
  • Page 87 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Playing Back Set the remote controller to the ZONE control mode (ZONE 2/ZONE 3) p85, 86), and then perform the following operations. 1. Point the remote controller at the unit, and press . •...
  • Page 88 Contents Connections Playback Setup ≫ ≫ ≫ ≫ component is connected to this unit with an HDMI cable, digital coaxial cable or digital optical cable, change the audio output of the AV component to the PCM output. • When video and audio via HDMI input are output to ZONE 2, set "1. Input/ Output Assign"...
  • Page 89 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Convenience functions Adjusting the tone You can adjust the sound quality of the speakers. 1. Press the Tone button on the main unit to select the setting to adjust from "Bass" and "Treble". Bass: Enhances or moderates the low-tone range of the speakers.
  • Page 90 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Listening Mode This unit is equipped with a variety of listening modes, and you can select the optimum listening mode for movies, TV, music, and games by pressing Movie/TV, Music, and Game. Selecting a Listening mode 1.
  • Page 91 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Checking the input format and listening mode Pressing repeatedly will switch the display of the main unit in the following order. Input source and volume Listening mode Input format The display is switched in a few seconds.
  • Page 92 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Listening Mode Effects In alphabetical order region (sound elements for the subwoofer). • To enable transfer of this audio format, connect via a digital cable and set „ AllCh Stereo audio output on the player to Bitstream output. This mode is ideal for background music.
  • Page 93 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ DSD possible to record a maximum of 7.1 channels with additional channels such as the surround back channel. It also supports low bit rates. This mode is suitable for playing sources recorded in DSD. •...
  • Page 94 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Game-Sports audio mixing, and it is characterized by the precise positioning of sounds and the ability to express sound movement. This mode is suitable for sports games. • To enable transfer of this audio format, connect via an HDMI cable and set audio output on the player to Bitstream output.
  • Page 95 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Selectable listening modes „ Movie/TV button You can select a variety of listening modes Input Format Listening Mode according to the audio format of the signal to be Multich PCM Direct input. Input Format Listening Mode Multich...
  • Page 96 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode Dolby Atmos Direct Direct Direct DTHD • You can select the Dolby Atmos DTHD *1 *2 *1 *2 DD+ or DTHD TV Logic DSur...
  • Page 97 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode DTS 96/24 Direct DTS-HD HR Direct DTS-ES Direct DTS 96/24 DTS-HD HR *1 *2 *1 *2 DSur DSur ES Matrix DTS Neural:X DTS Neural:X ES Discrete...
  • Page 98 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Music button Input Format Listening Mode Input Format Listening Mode Multich PCM Direct Dolby Atmos Direct Input Format Listening Mode • You can select the Stereo Stereo Analog Direct DD+ or DTHD Multich Dolby Atmos...
  • Page 99 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode Direct Direct DTS 96/24 Direct DTHD Stereo Stereo Stereo DTS 96/24 DTHD *1 *2 *1 *2 *1 *2 DSur DSur DSur DTS Neural:X DTS Neural:X...
  • Page 100 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Game button Input Format Listening Mode Input Format Listening Mode DTS-HD HR Direct DTS-ES Direct Input Format Listening Mode Stereo Stereo Analog Direct DTS-HD HR *1 *2 DSur DSur ES Matrix DTS Neural:X DTS Neural:X ES Discrete...
  • Page 101 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode Multich PCM Direct Dolby Atmos Direct Direct • You can select the Multich Dolby Atmos *1 *2 DD+ or DTHD DSur Game-RPG DSur...
  • Page 102 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode Direct DTS 96/24 Direct DTS-HD HR Direct DTHD DTS 96/24 DTS-HD HR DTHD *1 *2 *1 *2 *1 *2 DSur DSur DSur DTS Neural:X...
  • Page 103 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Input Format Listening Mode DTS-ES Direct ES Matrix ES Discrete DSur DTS Neural:X Game-RPG Game-Action Game-Rock Game-Sports AllCh Stereo Full Mono This can only be selected when no surround back speaker is connected. Surround back speakers need to be installed.
  • Page 104 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Setup Menu Menu list You can configure advanced settings to have a more enjoyable experience with this unit. For operation details, refer to "Menu operations". ( p106) 1. Input/Output 1. TV Out / OSD Make settings for TV output and On-Screen Displays (OSD) that appear on the TV.
  • Page 105 Contents Connections Playback Setup ≫ ≫ ≫ ≫ 5. Listening Mode 1. BD/DVD Preset the favorite listening mode when "BD/DVD" input is selected. p119 Preset 2. CBL/SAT Preset the favorite listening mode when "CBL/SAT" input is selected. p119 3. GAME p119 Preset the favorite listening mode when "GAME"...
  • Page 106 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Menu operations Use the on-screen displays (OSD) that appear on the TV to make the settings. Press on the remote controller to display the Setup menu. Setup 1. Input/Output Assign 1. TV Out / OSD 2.
  • Page 107 Contents Connections Playback Setup ≫ ≫ ≫ ≫ 1. Input/Output Assign Setting Item Default Value Setting Details Impose OSD Set whether or not to display information such as „ 1. TV Out / OSD volume adjustment or switching of input on the TV screen.
  • Page 108 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 2. HDMI Input Setting Item Default Value Setting Details "HDMI 1 (HDCP 2.2)" to "HDMI 6 (HDCP 2.2)": Change input assignment between the input selectors and HDMI IN jacks. Assign a desired HDMI IN jack to the TV button. If you do not assign a jack, select "---".
  • Page 109 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 3. Video Input Setting Item Default Value Setting Details PHONO "COMPONENT 1", "COMPONENT 2": Assign the Change input assignment between the input selectors and COMPONENT VIDEO COMPONENT VIDEO IN jacks to the PHONO IN jacks and the VIDEO IN jacks.
  • Page 110 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 4. Digital Audio Input „ 5. Analog Audio Input Change input assignment between the input selectors and DIGITAL IN COAXIAL/ Change input assignment between the input selectors and AUDIO IN jacks. If you OPTICAL jacks.
  • Page 111 Contents Connections Playback Setup ≫ ≫ ≫ ≫ 2. Speaker Setting Item Default Value Setting Details Height 2 Speaker Rear High Set the speaker type if height speakers are „ 1. Configuration connected to the HEIGHT 2 terminals. Select "Front High", "Top Front", "Top Middle", "Top Rear", Change the settings of connection environment of the speakers.
  • Page 112 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Setting Item Default Value Setting Details Setting Item Default Value Setting Details Bi-Amp Set whether the front speakers are bi-amp Center 100Hz Select the crossover frequency from "40Hz" to connected. "200Hz" to start outputting frequencies for each "No": When front speakers are not bi-amp channel.
  • Page 113 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 3. Distance Setting Item Default Value Setting Details Surround 100Hz Select the crossover frequency from "40Hz" to Set the distance from each speaker to the listening position. "200Hz" to start outputting frequencies for each channel.
  • Page 114 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Setting Item Default Value Setting Details Setting Item Default Value Setting Details Surround Left 7.0 ft/2.10 m Specify the distance between each speaker and Height 2 Left 0 dB Select a value between "-12 dB" and "+12 dB" (in the listening position.
  • Page 115 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 5. Dolby Enabled Speaker Setting Item Default Value Setting Details Height 1 0.0 dB After selecting the speaker frequency between Change the settings of Dolby Enabled Speakers. "25 Hz" and "16 kHz" with the cursors / , adjust the volume of that frequency between "-6.0 dB"...
  • Page 116 Contents Connections Playback Setup ≫ ≫ ≫ ≫ 3. Audio Adjust „ 3. DTS Change the setting of when DTS signals are input. „ 1. Multiplex/Mono Setting Item Default Value Setting Details Change the settings of multiplex audio playback. DTS Auto When inputting DTS signals that include extended Surround channel information, the optimum listening mode is...
  • Page 117 Contents Connections Playback Setup ≫ ≫ ≫ ≫ 4. Source „ 5. Volume Change the Volume settings. „ 1. IntelliVolume Setting Item Default Value Setting Details Adjust the volume level when there are differences in volume level among multiple Mute Level -∞dB Set the volume lowered from the listening volume devices connected to this unit.
  • Page 118 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Audio Select Setting Item Default Value Setting Details PCM Fixed Mode Select whether to fix input signals to PCM (except Select the priority for input selection when multiple audio sources are connected multi-channel PCM) when you select "HDMI", to one input selector, for example, connections to both the "BD/DVD"...
  • Page 119 Contents Connections Playback Setup ≫ ≫ ≫ ≫ 5. Listening Mode Preset 6. Hardware „ 1. HDMI You can preset your favorite listening mode to each input. (For example, you can always apply straight decode to the Dolby TrueHD source of Blu-ray Disc to play Change the settings of the HDMI function.
  • Page 120 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Setting Item Default Value Setting Details Setting Item Default Value Setting Details HDMI Standby When this is set to anything other than "Off", Audio TV Out You can enjoy audio through the speakers of the Through you can play the video and audio of an HDMI- TV while this unit is on.
  • Page 121 • When LAN is configured with a DHCP, set "DHCP" to "Enable" to configure the Friendly Name Integra DRX-3.2 Change the model name of this unit which is setting automatically. ("Enable" is set by default) To assign fixed IP addresses...
  • Page 122 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 3. Bluetooth Setting Item Default Value Setting Details AirPlay Password You can set a password of up to 31 digits so that Change the settings for the Bluetooth function. only registered users can use AirPlay ®...
  • Page 123 Setting Item Default Value Setting Details on the power of the unit via network using an application such as Integra Remote that can control Sleep Timer You can allow the unit to enter standby this unit. automatically when the specified time elapses.
  • Page 124 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Setting Item Default Value Setting Details Setting Item Default Value Setting Details Bluetooth Wakeup Off BD/DVD Main Set the 12V trigger output setting to each input. This function wakes up the unit on standby by "Off": No output connecting a BLUETOOTH-enabled device.
  • Page 125 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Setting Item Default Value Setting Details Setting Item Default Value Setting Details GAME Main Set the 12V trigger output setting to each input. Main Set the 12V trigger output setting to each input. "Off": No output "Off": No output "Main": Output when "GAME"...
  • Page 126 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Setting Item Default Value Setting Details Setting Item Default Value Setting Details Main Set the 12V trigger output setting to each input. PHONO Main Set the 12V trigger output setting to each input. "Off": No output "Off": No output "Main": Output when "CD"...
  • Page 127 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 6. 12V Trigger B Setting Item Default Value Setting Details Main Set the 12V trigger output setting to each input. Set when outputting the control signal (maximum 12 V/25 mA) through the 12V "Off": No output TRIGGER OUT B jack.
  • Page 128 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Setting Item Default Value Setting Details Setting Item Default Value Setting Details CBL/SAT Zone 2 Set the 12V trigger output setting to each input. STRM BOX Zone 2 Set the 12V trigger output setting to each input. "Off": No output "Off": No output "Main": Output when "CBL/SAT"...
  • Page 129 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Setting Item Default Value Setting Details Setting Item Default Value Setting Details Zone 2 Set the 12V trigger output setting to each input. Zone 2 Set the 12V trigger output setting to each input. "Off": No output "Off": No output "Main": Output when "AUX"...
  • Page 130 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Setting Item Default Value Setting Details Setting Item Default Value Setting Details TUNER Zone 2 Set the 12V trigger output setting to each input. BLUETOOTH Zone 2 Set the 12V trigger output setting to each input. "Off": No output "Off": No output "Main": Output when "TUNER"...
  • Page 131 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Setting Item Default Value Setting Details Setting Item Default Value Setting Details BD/DVD Main/Zone 2/ Set the 12V trigger output setting to each input. GAME Main/Zone 2/ Set the 12V trigger output setting to each input. Zone 3 "Off": No output Zone 3...
  • Page 132 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Setting Item Default Value Setting Details Setting Item Default Value Setting Details Main/Zone 2/ Set the 12V trigger output setting to each input. Main/Zone 2/ Set the 12V trigger output setting to each input. Zone 3 "Off": No output Zone 3...
  • Page 133 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Setting Item Default Value Setting Details Setting Item Default Value Setting Details PHONO Main/Zone 2/ Set the 12V trigger output setting to each input. Main/Zone 2/ Set the 12V trigger output setting to each input. Zone 3 "Off": No output Zone 3...
  • Page 134 Contents Connections Playback Setup ≫ ≫ ≫ ≫ 7. Multi Zone „ 2. Zone 3 Change the settings for Zone 3. „ 1. Zone 2 Setting Item Default Value Setting Details Change the settings for Zone 2. Maximum Volume Off Set the maximum value for Zone 3 to prevent the volume from becoming too loud.
  • Page 135 Setting Details network function is activated. Remote ID If multiple Integra/ONKYO products are installed in „ 4. Initial Setup the same room, select the ID for the remote control used with this unit from "1", "2" and "3" to prevent Make the initial setup from the setup menu.
  • Page 136 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Quick Menu Menu operations You can quickly adjust the settings you frequently use, such as tone adjustments, etc. You can make the settings on the TV screen during playback. Press Q on the remote controller to display the Quick Menu.
  • Page 137 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ AccuEQ – When the input signal is DTS:X, and "Dialog Control" is not 0 dB Center Spread: Adjust the width of the sound field of the front channel when AccuEQ Room Calibration: Enable or disable the equalizer function that playing in the Dolby Audio - DSur listening mode.
  • Page 138 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Web Setup Menu operations You can make the settings for the network function of this unit using an Internet Network Connection: You can select a network connection method. If you select browser on a PC, smartphone, etc. "Wireless", select an access point from "Wi-Fi Setup"...
  • Page 139 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Firmware Update Updating Function on This Unit This unit has a function to update the firmware (system software) via network or USB port. This function can improve various operations and add various functions.
  • Page 140 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Updating the Firmware via Network • Check that the unit is turned on, and the connection to the Internet is secured. • If "Firmware Update" is grayed out and cannot be selected, wait for a while •...
  • Page 141 Contents Connections Playback Setup ≫ ≫ ≫ ≫ • Others: After removing the power plug once, insert it to the outlet, and then start the operation from the beginning. ❏ Updating via USB ( p142) Front Panel≫ Rear Panel≫ Remote≫...
  • Page 142 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Updating via USB • Prepare a 128MB or larger USB storage device. The format of USB storage as an independent device. devices supports FAT16 or FAT32 file system format. 5. Press – Media inserted into a USB card reader may not be used for this function. The Setup menu is displayed on the TV screen.
  • Page 143 Contents Connections Playback Setup ≫ ≫ ≫ ≫ • When "Completed!" is displayed, the update is complete. 8. Disconnect the USB storage device from the unit. 9. Press On/Standby on the main unit to turn the unit into standby mode. The process is completed, and your firmware is updated to the latest version.
  • Page 144 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Initial Setup with Auto Start-up Wizard Operations When you turn the unit on for the first time after purchase, the Initial Setup screen is automatically displayed on the TV to allow you to make settings required for TV’s REMOTE startup using simple operations following on-screen guidance.
  • Page 145 Contents Connections Playback Setup ≫ ≫ ≫ ≫ • If you have terminated the Initial Setup halfway, turn this unit to standby mode. • If the power of this unit suddenly turns off, the wires in the speaker cables Then turning the power on again can display the Initial Setup again. have touched the rear panel or other wires, and the protection circuit is The Initial Setup appears on the screen each time the power is turned on working.
  • Page 146 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 5. ARC Setup 5. Disconnect the speaker setup microphone. „ 3. Multi Zone Sound Check To connect with an ARC-compatible TV, select "Yes". The ARC setting on this unit turns on, and you can listen to the TV's audio through this unit. Output test tones to ZONE 2 to enjoy audio in a separate room (ZONE 2) in •...
  • Page 147 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Troubleshooting „ Tuner „ BLUETOOTH function Before starting the procedure „ Network function Problems may be solved by simply turning the power on/off or disconnecting/ „ USB storage device connecting the power cord, which is easier than working on the connection, setting and operating procedure.

  • Page 148: When The Unit Is Operating Erratically

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ When the unit is operating erratically ❏ Try restarting the unit Restarting this unit may solve the problem. After turning the unit to standby mode, press and hold the On/Standby button of the main unit for at least 5 seconds, and then restart the unit.

  • Page 149: Troubleshooting

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Troubleshooting „ Power ❏ Cannot turn on the unit • Make sure that the power cord is properly plugged into the wall outlet. p59) • Unplug the power cord from the outlet once, wait 5 seconds or more, then plug it in again. ❏...
  • Page 150 Contents Connections Playback Setup ≫ ≫ ≫ ≫ ❏ No sound from a connected player • Change the input selector on this unit to the position of the terminal to which the player is connected. • Check the digital audio output setting on the connected device. On some game consoles, such as those supporting DVD, the default setting may be off.

  • Page 151: X84; Listening Modes

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ ❏ Sound suddenly reduces • When using the unit for extended periods with the temperature inside the unit exceeding a certain temperature, the volume may be reduced automatically to protect the circuits. „...

  • Page 152: X84; Video

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Video • Confirm that the connection between the output jack on the connected device and the input jack on this unit is correct. • Make sure that none of the connecting cables are bent, twisted, or damaged. •...

  • Page 153: X84; Tuner

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Tuner ❏ Poor reception or much noise • Recheck the antenna connection. p55) • Move the antenna away from the speaker cord or power cord. • Move the unit away from your TV or PC. •...

  • Page 154: X84; Network Function

    • If the PC is downloading or copying large files, the playback sound may be interrupted. ❏ The initial setup of Chromecast built-in cannot be performed on Integra Control Pro • If you have agreed to the privacy policy that requires agreement to use the Chromecast built-in function during the Initial Setup of this unit, you do not have to agree to the privacy policy on Integra Control Pro.

  • Page 155: X84; Usb Storage Device

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ USB storage device ❏ USB storage device is not displayed • Check if the USB storage device or USB cable is securely inserted to the USB port of the unit. p69) •...

  • Page 156: X84; Multi-Zone Function (For Compatible Models Only)

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ ❏ Playback sound is interrupted, or communication is not possible • You may not receive radio waves due to poor radio wave conditions. Shorten the distance from the wireless LAN router, or remove obstacles to improve visibility, and connect again.

  • Page 157: X84; Display

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Display ❏ The display does not light up • When the Dimmer function is working, the display may go dim or turn off (for compatible models only). Press the Dimmer button, and change the brightness level of the display.
  • Page 158 HDCP standards. Operation has been confirmed on the following devices: (As of January 2018) Toshiba brand televisions; Sharp brand televisions; Onkyo and Integra brand RIHD-compatible players; Toshiba brand players and recorders; Sharp brand players and recorders (when used with a Sharp brand television)
  • Page 159 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Supported Audio Formats – 4K (3840×2160p) 24/25/30Hz, 4K SMPTE (4096×2160p) 24/25/30Hz : RGB/YCbCr4:4:4 (8 bit), YCbCr4:2:2 (12 bit) 2 ch linear PCM: – 4K (3840×2160p) 50/60Hz, 4K SMPTE (4096×2160p) 50/60Hz : 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 16/20/24 bit YCbCr4:2:0 (8 bit) Multi-channel linear PCM: Maximum 7.1 channels, 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz,...
  • Page 160 Contents Connections Playback Setup ≫ ≫ ≫ ≫ General Specifications „ Amplifier Section Tone Control Characteristics (ZONE 2) ±10 dB, 100 Hz (BASS) Rated Output Power (FTC) (North American) ±10 dB, 10 kHz (TREBLE) With 8 ohm loads, both channels driven, from 20-20,000 Hz; rated 90 watts Signal to Noise Ratio per channel minimum RMS power, with no more than 0.08% total harmonic 106 dB (IHF-A, LINE IN, SP OUT)
  • Page 161 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Network Section „ General Ethernet LAN Power Supply 10BASE-T/100BASE-TX AC 120 V, 60 Hz (North American) Wireless LAN AC 220 - 240 V, 50/60 Hz (Others) IEEE 802.11 a/b/g/n standard Power Consumption (Wi-Fi standard) 740 W (North American)
  • Page 162 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Audio Format Speaker Outputs Dolby Atmos, Dolby TrueHD, Dolby Digital, Dolby Digital Plus, DTS, DTS:X, FRONT L/R, CENTER, SURROUND L/R, HEIGHT 1 L/R or ZONE 2 L/R, DTS-HD Master Audio, DTS-HD High Resolution Audio, DTS 96/24, DTS- SURROUND BACK L/R or HEIGHT 2 L/R or ZONE 3 L/R (North American ES, DTS Express, DSD, PCM models are compatible with banana plugs.)
  • Page 163 SN 29403441_EN (C) Copyright 2018 Onkyo & Pioneer Corporation Japan. All rights reserved. http://www.onkyo.com/privacy/ H1804-0...

Table of Contents

Save PDF