Integra DRX-2.1 Basic Manual page 47

> Specifications > Advanced Setup
■ 6� Equalizer Settings
You can adjust the output volume of the range of each connected speaker. You can adjust
the volume of the different sound ranges for each of the speakers. You can set three
different equalizers in Preset 1 to 3. You can select up to five bands for the Subwoofer and
15 bands for all other speakers.
Setting Item Default Value
Front 0 dB
Center 0 dB
Height 0 dB
Surround 0 dB
Surround Back 0 dB
Subwoofer 0 dB
> Listening Modes
Setting Details
After selecting the speaker frequency from
between "25 Hz" and "16 kHz" with the cursors
/ , adjust the volume of that frequency between
"−6 dB" and "＋6 dB" with / .
After selecting the speaker frequency from
between "25 Hz" and "16 kHz" with the cursors
/ , adjust the volume of that frequency between
"−6 dB" and "＋6 dB" with / .
After selecting the speaker frequency from
between "25 Hz" and "16 kHz" with the cursors
/ , adjust the volume of that frequency between
"−6 dB" and "＋6 dB" with / .
• The setting cannot be changed if "Zone 2" is set
in "Configuration" - "Zone Speaker" and Zone 2
is on.
After selecting the speaker frequency from
between "25 Hz" and "16 kHz" with the cursors
/ , adjust the volume of that frequency between
"−6 dB" and "＋6 dB" with / .
After selecting the speaker frequency from
between "25 Hz" and "16 kHz" with the cursors
/ , adjust the volume of that frequency between
"−6 dB" and "＋6 dB" with / .
• The setting cannot be changed if "Zone 2" is set
in "Configuration" - "Zone Speaker" and Zone 2
is on.
After selecting the speaker frequency from
between "25 Hz" and "160 Hz" with the cursors
/ , adjust the volume of that frequency between
"−6 dB" and "＋6 dB" with / .
• This cannot be selected if "No" is set in
"Configuration" - "Subwoofer".
> Network Functions
• The result may not be as expected depending on the input source and listening mode setting.
> Basic Manual
Troubleshooting Supplementary Information, etc� |
15