Selecting The Listening Mode - Integra DTM-40.4 Instruction Manual

Enjoying Audio Sources
—Continued
Audio

Selecting the Listening Mode

Press the remote controller's [Audio]
button repeatedly to select the listening
mode. The setting will change as follows
each time you press the [Audio] button.
Stereo Stereo (M.Opt: ON)
Direct Mono
When the Stereo indication is shown, pressing the
[Audio] button will make the display indicate "Music
Optimizer: On" for several seconds, and the "M.Opt"
indicator will also light. In this state, you can enjoy
stereo sound enhanced by the Music Optimizer function.
When the DIRECT function is off, the tone controls can
be used to adjust the sound, and the DIRECT indicator
goes off.
When the DIRECT function is on, the tone controls are
bypassed, so you can enjoy pure sound. The DIRECT
indicator lights up.
You can configure whether the DIRECT function is
applied or not for input sources individually.
The Music Optimizer function enhances the sound
quality of compressed music files.
To cancel the Music Optimizer function, press the
[Audio] button repeatedly to make the "M.Opt"
indicator disappear.
To cancel the DIRECT function, press the remote
controller's [Audio] button repeatedly to select Stereo.
Note:
The Music Optimizer function only works with PCM
digital audio input signals with a sampling rate below 48
kHz and analog audio input signals.
The Music Optimizer is disabled when the Direct Audio
listening mode is selected.
21
En-