Table of Contents
Advertisement
Upgrade Succeeded
After the upgrade has completed, a screen appears
to inform you that the procedure was successful:
After the upgrade has completed, a screen appears
to inform you that the procedure was successful:
GCS1644 [MAIN] . .
Click Finish to close the Firmware Upgrade Utility.
After a successful completion, the switches exit
Firmware Upgrade Mode, and reset themselves.
If you have a DCC mode installation be sure to
reconnect the cable connected to the DCC port,
and set the DCC switch back to Client on the
appropriate switch (See Quad-View (DCC Mode),
page 15).
31
Advertisement
Table of Contents
