Table of Contents
Advertisement
Invoke HSM, then press [F5]
Invoke HSM, then press [b]
Invoke HSM, then press [x] [Enter]
Invoke HSM, then press [u] [p] [g]
[r] [a] [d] [e] [Enter]
Invoke HSM, then press [r] [Enter]
Invoke HSM, then press [d]
Invoke HSM, then press [m]
Invoke HSM, then press [F1]
Invoke HSM, then press [n]
Invoke HSM, then press [w]
Invoke HSM, then press [c]
*Note: To exit HSM manually, press Esc or spacebar
USB Reset
Toggle hotkey beepers on or off
Disable or enable port switching hotkey
Activate Firmware Upgrade Mode – Front panel KVM LED will flash
indicating Firmware Upgrade Mode is activated.
Restore default KVM settings
Capture and store video information on specific port
Enable or disable mouse emulation
Reset keyboard and mouse under some special OS' that do not
support USB 2.0
Toggles keyboard emulation on/off (default is on)
Toggles mouse port switching on/off. To use this function, mouse
emulation must be enabled
Changes front panel push buttons to a hotkey of your choice
(GCS1644 only)
23
Advertisement
Table of Contents
