Related Documents; Revision History; Contact - u-blox EVK-NINA-B3 User Manual

Related documents

[1] Arduino website
[2] Raspberry Pi website
[3] NINA-B3 data sheet,
[4] NINA-B3 series system integration manual,
[5] u-connect AT commands manual,
[6] SEGGER J-Link software
[7] u-connectXpress user guide,
[8] GitHub repository for u-blox Open CPU modules
[9] FTDI Chip home page:
☞
For product change notifications and regular updates of u-blox documentation, register on our
website, www.u-blox.com.

Revision history

Revision Date
R01 07-Feb-2018
R02 6-Jul-2018
R03 13-Sep-2018
R04 16-Apr-2019
R05 23-Sep-2019
R06 7-Jul-2020
R07 3-Dec-2020
R08 16-May-2023

Contact

u-blox AG
Address: Zürcherstrasse 68
8800 Thalwil
Switzerland
For further support and contact information, visit us at www.u-blox.com/support.
UBX-17056481 - R08
C1-Public
UBX-17052099
UBX-14044127
UBX-16024251
https://ftdichip.com/
Name Comments
cmag, ajoh, kgom Initial release.
kgom Included reference to NINA-B31 Getting Started guide in section 2.2.1.
mape Added information about open CPU devices and how to use them on
Windows 10 host.
ajoh, fbro Included information about the EVK-NINA-B3x6 variant. Improved the quality
of most pictures, changed the structure of this document. Updated section
3.2. Added information about debugging options (section 3.2.2.2), measuring
current consumption (section 3.3) and additional interfaces (section 5.4).
flun Clarified information about RGB LED status in Table 10 (section 5.1).
mape Removed references to u-connectScript. Improved EVK-NINA-B30x setup
instructions in chapter 3.2.2. Added information about how to use secondary
UART in u-connectXpress (5.4.2).
mape Corrected formatting in Table 10, revised number of supported variants in
section 2.1, and included other editorial updates.
mape Added note about FTDI driver install in
Overview
EVKs. Updated
evaluation
Related documents
UBX-17056748
to clarify that the Atmel chip is not mounted on u-connectXpress
Setting up the evaluation
board.
EVK-NINA-B3 - User guide
Evaluation board setup. Added note in
board. Revised Setting up the
Page 40 of 40