Connection Of 10/100 Base-T Interface - PCE Health and Fitness PCE-HT 420 Instruction Manual

PCE-HT 420 (User's manual)
allowing the user to change the IP address through the website.
Note: The monitor allows for up to 10 connections simultaneously!!
The applications implemented in the monitor use from 1 to 2
connections:
●Modbus TCP/IP - 1 connection
●Web server
●FTP server
●SMTP client

5.6.1. Connection of 10/100 BASE-T interface

To access the Ethernet services, it is required to connect the
monitor to the network via the RJ45 slot located at the top of the
monitor, operating in accordance with TCP/IP.
Fig.6 View and numbering of RJ45 slot pins
Description of the monitor RJ45 slot diodes function:
yellow LED
●
connected to the Ethernet network 100 Base-T, does not light up
when PCE-HT 420 is not connected to the network or is connected
to 10-Base-T network.
green LED
●
data, illuminates constantly when data is transmitted
In order to connect PCE-HT 420 to the network the User should
use
- minimum 1 connection
- 2 connections
- 1 connection
- illuminates when PCE-HT 420 is properly
- Tx/Rx flickers when the monitor sends and receives
14 m