XDP Recreation SWINGin' Free G Series Manual page 32

STEP 14 - Seesaw assembly (continued)
 Secure U17 to U20 by using U2, U14, U10 and U5 as shown below.
U2
U14
A9
U17
U10
U5
U20
NOTE:
1. Do not over-tighten the nuts and bolts at every step.
2. Do not snap in the cover of plastic cap until you have finished the assembly of
each step and went back to tighten all of the nuts and bolts.
DO NOT RETURN TO RETAILER WHERE PURCHASED AT. 31
CONTACT XDP FOR PARTS AND SUPPORT AT 1.866.884.0535 or service@xdprecreation.com