XDP Recreation SWINGin' Free G Series Manual page 18

STEP 3 – Assemble the support legs of swing set
 Connect A7 to A8 & A9 and secure using B1, B5, B4 and B3 as shown below.
 Repeat this step for the right side of the swing set (A3 with A7).
A1
A7 A7
B5
B3
B4
B1
B3
B4
A8
B5
B1
A9
NOTE:
1.
Do not over-tighten the nuts and bolts at every step.
2. Do not snap in the cover of plastic cap until you have finished the assembly of
each step and went back to tighten all of the nuts and bolts.
DO NOT RETURN TO RETAILER WHERE PURCHASED AT. 17
CONTACT XDP FOR PARTS AND SUPPORT AT 1.866.884.0535 or service@xdprecreation.com