Advertisement
STEP 1 – Assemble the top bar frame of the swing set
Connect A1, A2 and A3 secure with B1, B5, B4 and B3 as shown below.
Note: All round holes should be facing up and concave holes facing down.
B3
B3
B4
B4
B5
B5
A2
A3
A1
B1
B1
NOTE:
1.
Do not over-tighten the nuts and bolts at every step.
2. Do not snap in the cover of plastic cap until you have finished the assembly of
each step and went back to tighten all of the nuts and bolts.
DO NOT RETURN TO RETAILER WHERE PURCHASED AT.
15
CONTACT XDP FOR PARTS AND SUPPORT AT 1.866.884.0535 or service@xdprecreation.com
Advertisement
