Advertisement
STEP 13 - Seesaw assembly
Attach U20 to A9. Align the holes on U20 to the two holes on the bottom of A9
and secure using U3, U4, U15 and U5 as shown below.
U5
U15
U5
U15
A9
U4
U3
U20
NOTE:
1. Do not over-tighten the nuts and bolts at every step.
2. Do not snap in the cover of plastic cap until you have finished the assembly of
each step and went back to tighten all of the nuts and bolts.
DO NOT RETURN TO RETAILER WHERE PURCHASED AT.
30
CONTACT XDP FOR PARTS AND SUPPORT AT 1.866.884.0535 or service@xdprecreation.com
Advertisement
