Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Trotec Manuals
  4. Cash Counter
  5. PC200
  6. Operating manual

Trotec PC 200 Operating Manual

Particle counter
Hide thumbs Also See for PC 200:

Advertisement

Quick Links

Download this manual
PC 200
EN
OPERATING MANUAL
PARTICLE COUNTER

Advertisement

loading

Related Manuals for Trotec PC 200

Summary of Contents for Trotec PC 200

  • Page 1 PC 200 OPERATING MANUAL PARTICLE COUNTER...

  • Page 2: Table Of Contents

    - 5μ = 26 - 10μ = 14 Then only 12 Follow the manual particles of the size 5μ were measured. Information marked with this symbol indicates that the 12 + 14 = 26 operating manual must be observed. Operating manual – particle counter PC 200...

  • Page 3: Safety

    Any unauthorised changes, modifications or alterations to the device are forbidden. Personnel qualifications People who use this device must: • have read and understood the operating manual, especially the Safety chapter. Operating manual – particle counter PC 200...

  • Page 4: Information About The Device

    Colour display legal regulations. Function keys "F1", "F2" and "F3" Arrow key up "ENTER" key "RUN/STOP" key Arrow key down "On/Off" key "ESC" key Operating manual – particle counter PC 200...

  • Page 5: Technical Data

    Occupational Health and Safety Wet-bulb temperature ±1,0 °C (1,8 °F) Ordinance on Artificial Optical accuracy Radiation (TROS)) PC interfaces USB connection Tripod thread 1/4 inch – 20 UNC Storage conditions -10 °C to +50 °C at < 95 % RH (non-condensing) Operating manual – particle counter PC 200...

  • Page 6: Transport And Storage

    • 1 x Mini tripod • 1 x USB connecting cable + software • 1 x Getting started guide • 1 x Transport case • 1 x Zero filter + connection hose • 1 x Charger Operating manual – particle counter PC 200...

  • Page 7: Operation

    Use "F2" button SYSTEM SET – system settings the "F1" and "F3" buttons to scroll through the displays. "F3" button Info – Information about the device "ENTER" "Measurement" screen button Operating manual – particle counter PC 200...
  • Page 8 You can open the following menus from the "Measurement" screen: "F1" button Take a photo/record a video "F2" button MEMORY SET – saved data "F3" button Particle Set – measurement settings "RUN/STOP" Start a new measurement button Operating manual – particle counter PC 200...
  • Page 9 4. Press "F1" to take a photo of the current display. ð The photo is displayed. ð The measurement continues in the background. 5. You can save the photo by pressing "F1" , or delete it by pressing "F3" Operating manual – particle counter PC 200...
  • Page 10 The supplied free software is designed for useful basic functionalities. Trotec assumes no liability with regard to this free software and also provides no support on that score. Trotec accepts no liability concerning the use of this free software and is under no obligation to make adjustments or to further develop updates or upgrades.

  • Page 11: Maintenance And Repair

    Never charge the battery at ambient temperatures below 10 °C or above 40 °C. The battery should be charged prior to initial start-up and when the battery is low. To do so, please proceed as follows: Operating manual – particle counter PC 200...

  • Page 12: Disposal

    Directive 2006/66/EC of the European Parliament and of the Council of 6 September 2006 on batteries and accumulators. Please dispose of batteries and accumulators according to the relevant legal requirements. Operating manual – particle counter PC 200...