Information marked with this symbol helps you to carry • Observe the storage and operating conditions (see out your tasks quickly and safely. Technical data). Follow the manual Information marked with this symbol indicates that the operating manual must be observed. particle counter BQ21...
Page 3
To use the device for its intended use, only use accessories and Warning spare parts which have been approved by Trotec. Dangers can occur at the device when it is used by untrained people in an unprofessional or improper way!
The device can be connected to another terminal device via Bluetooth. In combination with the Trotec MultiMeasure Mobile App, there are numerous possibilities for evaluating and displaying the measured values.
Page 5
Relative humidity ESC / button Ambient temperature Bluetooth button Size and number or mass concentration of particles START / ENTER button Measurement status Power button Date and time SET / button Bluetooth symbol Colour display Protective cap particle counter BQ21...
Page 6
• 1 x USB connecting cable Humidity level ±3.5 % RH at 20 % to 80 % RH accuracy ±5 % RH at 0 % to 20 % RH and 80 % • 1 x Charger to 100 % RH • 1 x Stand with screw • 1 x Quick guide particle counter BQ21...
• protected from dust and direct sunlight • with a cover to protect it from invasive dust if necessary • the storage temperature complies with the values specified in the Technical data ð A charging indicator appears on the display. particle counter BQ21...
Page 8
ð The Bluetooth symbol (20) goes out. The Bluetooth function can also be activated and deactivated via the system settings. For more information on the download and the functionalities of the app, please refer to the chapter Trotec MultiMeasure Mobile app. Carrying out a measurement Info...
Page 9
ð The date and time settings are saved. duration Unit (°C / °F) Changing the temperature unit Memory View Displaying the memory use Mass/Particle Selecting the measuring mode Particle (Particle) or mass concentration (Mass) Auto Power Off Setting the automatic switch- particle counter BQ21...
Page 10
2. Press the ESC button (4) for approx. 2 s to return to the 2. Press the ESC button (4) for approx. 2 s to return to the system settings menu. system settings menu. ð The Bluetooth symbol appears on the start screen. particle counter BQ21...
Page 11
1. Press the SET (8) or ESC button (4) to switch between °C measurement duration. and °F. 2. Press the ESC button (4) for approx. 2 s to return to the 2. Press the ESC button (4) for approx. 2 s to return to the system settings menu. system settings menu. particle counter BQ21...
Page 12
4. Press the ESC button (4) for approx. 2 s to return to the system settings menu. Info You can delete the memory by first pressing the ESC button (4) in the measurement screen and then simultaneously pressing the Bluetooth button (5) until a longer acoustic signal is emitted. particle counter BQ21...
3, 10 or 30 min. You can also Disable automatic switch-off. 2019-09-19 10:20 Auto Pow off Disable Install the Trotec MultiMeasure Mobile app on the terminal device you want to use in combination with the device. 3 MIN Info 10 MIN...
Page 14
1. Switch on the measuring device (see chapter Operation). 2. Make sure that the Bluetooth function is activated on the measuring device. 3. Start the Trotec MultiMeasure Mobile app on the terminal device. ð A list of active and available sensors will be displayed.
Page 15
You can select from the following options in the measuring menu: • reset the min/max average value • terminate the connection to the sensor • view and modify sensor settings • start recording of measured values particle counter BQ21...
Page 16
• Colour scaling: SETTINGS Opens the settings menu. You can select the Allows you to adjust the colour display of the measured language and – depending on the measuring values. device – adjust different settings. particle counter BQ21...
Page 17
Seconds SIGNATURE, CUSTOMER Minutes Minutes Minutes MEASUREMENTS Select Evaluations Select Info The parameters set here can also be set directly in the BQ21. The setting of the device from which the measurement is started is always given priority. particle counter BQ21...
Page 18
You can create a new customer set or import an existing contact from the phone book of the terminal Help device. Measurements Reports Customers Settings Sensors Import from address book NAME Last name FIRST NAME First name ADDRESS Address PHONE Phone ADDITIONAL INFORMATION Save particle counter BQ21...
EU countries on the website cleaners, but only clean water to moisten the cloth. https://hub.trotec.com/?id=45090. Otherwise, please contact an official recycling centre for electronic and electrical equipment Repair authorised for your country.