Kernau KDI 4855 SD User Manual page 49

NOTE: If any button is not pressed on the ready state, the machine turns off automatically after 15 minutes
NOTE: Do not open the door before a programme is complete.
NOTE: Leave the door slightly open at the end of a wash programme to speed up drying.
NOTE: If the door of the machine is opened or the power is cut during operation, the program will continue
when the door is closed or the power returns.
Buzzer Sound Control
To change the buzzer sound level, follow the below steps:
1. Open the door and press Programme (2) and Delay (4) buttons simultaneously for 3 seconds.
2. When sound setting is recognized, buzzer gives a long sound and machine will display last set level,
from "S0" to "S3".
3. To decrease sound level press Programme button (2). To increase sound level, press Delay button (4).
4. To save the selected sound level, turn off the machine. ''S0'' level means all voices are off. Factory
setting is "S3".
Save Power Mode
To activate or deactivate save power mode, follow the below steps:
1. Open the door and press Delay (4) and Options (5) buttons simultaneously for 3 seconds.
2. After 3 seconds, the machine will display last Setting, "IL1" or "IL0".
3. When Save Power Mode is activated, "IL1" will be displayed. On this mode, interior lights will turn
off 4 minutes after the door is opened, and the machine will turn off after 15 minutes of no activity in
order to save energy.
4. When Save Power Mode is deactivated "IL0" will be displayed. If Save Power Mode is deactive,
interior lights will be on as long as the door is open, and the machine will always be on unless it is
turned off by user.
5. To save the selected setting, turn off the machine.
In factory setting, Save Power Mode is active.
Natural Ion Tech (Model depending)
This function provides extra hygiene to the machine thanks to Ion Technology. Natural Ion Tech function is
activated by pressing Half Load (4) button for 3 seconds. Meanwhile display counts from 1 to 3. At the end of
3 seconds, "Ion" will be displayed which indicates Natural Ion Tech function is activated. The button is
released after "Ion" is displayed. If no intervention by user, 24 hour after activation of Natural Ion Tech
function, it is automatically cancelled.
NOTE: If machine is turned off, Natural Ion Tech function is cancelled.
NOTE: Natural Ion Tech function does not work with any program.
NOTE: If Natural Ion Tech function is active, Natural Ion Tech led lights up like dimming during door is
open.
Infoled 2.1 (Model Dependent
LED Indicator State of the Machine
The machine is running a program.
Red, continuous
Red, flashing
A program is cancelled.
The machine has a fault. Refer to
Red, flashing
section "Automatic fault warnings
rapidly
Green, continuous A program is finished.
and what to do".
EN 48