Taking Measurements - Tanita innerScan DUAL Instruction Manual

Taking Measurements

1.
When the monitor power is off, select "Input Data" in the app and
then follow the instructions in the app.
When "0.00kg" (0.0lb, 0.0stlb) is displayed, step onto the monitor.
2.
Measurement data is automatically sent to the smartphone.
If there is unsent data stored on the monitor, that data is also sent to the smartphone.
Note:
• When taking measurements while holding your smartphone, enter the weight that you want to
subtract into the "Smartphone's weight" section in the dedicated app before taking
measurements.
• The weight that you entered to be subtracted from your weight is displayed.
• The "Smartphone's weight" can be entered up to -2.00kg (-4.4lb, -4lb).
• The maximum weight (weighing capacity) is reduced by the amount entered for
the "Smartphone weight".
If you do not have your smartphone when taking measurements
Simply step onto the monitor. The auto-recognition feature will automatically recall your personal
data. Your monitor will store up to 10 sets of measurements.
Saved data is sent to the smartphone together with new measurements the next time
the smartphone is connected to the monitor when taking measurements.
en
11