Tanita innerScan DUAL Instruction Manual page 12

en
Taking Measurements
You can start taking measurements when you have finished entering your personal data.
1. Step onto the Monitor
Step onto the monitor when the power is off. The monitor starts measuring automatically.
2. View Your Results
After taking measurements, your results are automatically displayed in the order listed on the next page.
After the last result data is displayed, the weight is displayed again and then the monitor automatically turns off.
Note:
・Do not step off until " "disappears.
・The backlight color changes according to the recognized personal data number. (Blue/Pink/White/Light blue)
・When the monitor is connected to the smartphone and measurement data is saved in the monitor,
lights in the personal data display and the measurement result display screen.
・If there are more than 6 sets of data stored, the number of saved sets of data is displayed after the personal data display lights.
・Up to 10 sets of measurement data can be stored in the monitor.
・If you have set a nickname in the dedicated app, the nickname is displayed instead of the personal data number when personal
data is displayed.
If the wrong personal number is displayed
Press the button to select your personal number while readings or personal data is being displayed.
Then press the button to display your own personal data and measurement results.
Situations where mis-recognition may occur
- When measuring people who have similar weights and body shapes
- When measurements have not been taken for a few days and there is a reasonable change in body weight
- When measuring directly after having the monitor stood upright, carrying the monitor or storing it with items placed on top
If the monitor continues to mis-recognize, specify your personal data number manually before measurement. (P.14)
12