Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for IFM SI0555
Summary of Contents for IFM SI0555
- Page 1 Operating instructions Flow monitors SI0555...
-
Page 2: Table Of Contents
Contents 1 Safety instructions ������������������������������������������������������������������������ 3 2 Functions and features ����������������������������������������������������������������� 4 2�1 Application area ������������������������������������������������������������������������ 4 2�2 Operating principle flow monitoring ������������������������������������������� 4 3 Installation ������������������������������������������������������������������������������������ 5 3�1 Installation location �������������������������������������������������������������������� 5 3�2 Sources of interference in the pipe system ������������������������������� 6 3�3�... -
Page 3: Safety Instructions
Preliminary note • An instruction is indicated by “►”: Example: ► Check whether the unit operates correctly� • A reaction to the action is indicated by ">": Example: > LED 9 lights� 1 Safety instructions • Please read the product description prior to set-up of the unit� Ensure that the product is suitable for your application without any restrictions�... -
Page 4: Functions And Features
2 Functions and features 2.1 Application area The unit monitors the flow of liquid and gaseous media� 2.2 Operating principle flow monitoring • The unit detects the flow speed to the calorimetric measuring principle and switches the output: - output closed if medium is flowing / output open if no medium is flowing� This applies to the unit on delivery: output = normally open�... -
Page 5: Installation
• Adapters have to be ordered separately as accessories� A correct fit of the unit and ingress resistance of the connection are only ensured using ifm adapters� • For small flow rates ifm adapter blocks are available� 3.1 Installation location General •... -
Page 6: 3�2 Sources Of Interference In The Pipe System
3.2 Sources of interference in the pipe system Components integrated in the pipes, bends, valves, reductions, etc� lead to turbu- lence of the medium� This affects the function of the unit� Recommendation: Adhere to the distances between sensor and sources of interference: 5...10 x D 3...5 x D... -
Page 7: Electrical Connection
► Disconnect power� ► Connect the unit as follows: 3 BU Core colours of ifm sockets: 1 = BN (brown), 3 = BU (blue), 4 = BK (black) 5 Operating and display elements Flow High... -
Page 8: Set-Up And Settings For Water
6 Set-up and settings for water (For media other than water → 7�1: Low flow adjustment)� ► Switch on the supply voltage� > All LEDs light and go out again step by step� During this time the output is closed (if configured as normally open)� The unit is in the operating mode� ►... -
Page 9: 6�2 High Flow Adjustment (Optional)
6.2 High flow adjustment (optional) The unit determines the existing flow as normal flow and adapts the display repre- sentation (all LEDs except the switch point LED light green)� ► Let the normal flow circulate in the installation� ► Press the pushbutton and keep it pressed�... -
Page 10: 7�3 Restore The Factory Setting (Reset)
7.3 Restore the factory setting (reset) ► Press the pushbutton for at least 15 s� > LED 9 lights, after approx� 5 s it flashes� > After approx� 15 s LEDs 0���9 flash orange� ► Release the pushbutton� All settings are reset to the factory setting: - operating area: 5 ���100 cm/s for water - switch point: LED 7 - output function: NO... -
Page 11: Operation
9 Operation After every power on all LEDs light and go out again step by step (during this time the output is closed if configured as normally open)� The unit is then ready for operation� In case of power failure or interruption all settings remain� Operating indicators Green LED bar: Current flow within the representa- tion range�... -
Page 12: Scale Drawing
11 Scale drawing 1: LED bar display 2: set button 3: tightening torque 25 Nm 12 Technical data Application area ����������������������������������������������������������������������������������������Liquids and gases Operating voltage [V] �����������������������������������������������������������������������������������������48 DC -10% Current rating [mA] ����������������������������������������������������������������������������������������������������������250 Short-circuit protection, pulsed; reverse polarity / overload protection Voltage drop [V] �������������������������������������������������������������������������������������������������������������<... - Page 13 EN 61000-4-3 HF radiated: ..................10 V/m EN 61000-4-4 Burst: ..................... 2 kV EN 61000-4-6 HF conducted: ..................10 V for water; 5...100 cm/s; 25°C (factory setting) for water; 5...100 cm/s; 10...70°C The sensor conforms to the standard EN 61000-6-2 More information at www.ifm.com...