Appliance Door; Removing And Fitting The Appliance Door - Siemens HB274AB 0S Series Instruction Manual

Hide thumbs Also See for HB274AB 0S Series:
Table of Contents

Advertisement

Then insert the rail into the front socket
2.
rail also rests against the cooking compartment wall
here, and press it downwards
qAppliance door
W ith good care and cleaning, your appliance will retain
A p p l i a n c e d o o r
its appearance and remain fully functional for a long
time to come. This will tell you how to remove the
appliance door and clean it.

Removing and fitting the appliance door

For cleaning purposes and to remove the door panels,
you can detach the appliance door.
The appliance door hinges each have a locking lever.
When the locking levers are closed (figure
appliance door is secured in place. It cannot be
detached.
When the locking levers are open in order to detach the
appliance door (figure
"
cannot snap shut.
:
Warning
Risk of injury!
If the hinges are not locked, they can snap shut with
great force. Ensure that the locking levers are always
fully closed or, when detaching the appliance door,
fully open.
The hinges on the appliance door move when
Risk of injury!
opening and closing the door, and you may be
trapped. Keep your hands away from the hinges.
, until the
...
(figure
).
"
), the
!
), the hinges are locked. They
Removing the appliance door
Open the appliance door fully and push it in the
1.
direction of the appliance.
Fold up the two locking levers on the left and right
2.
(figure
).
!
Close the appliance door as far as it goes
3.
both hands, grip the door on the left- and right-hand
side and pull it up and out (figure
:
Warning – Risk of injury!
Components inside the appliance door may have sharp
edges. Wear protective gloves.
Fitting the appliance door
Reattach the appliance door in the opposite sequence
to removal.
When attaching the appliance door, ensure that both
1.
hinges are inserted straight into the opening (figure
).
!
Place both hinges at the bottom on the outer panel
and use this as a guide.
Ensure that the hinges are inserted into the correct
opening. You must be able to insert them easily and
without resistance. If you can feel any resistance,
check that the hinges are inserted into the correct
opening.
Open the appliance door fully. Fold both locking
2.
levers closed again (figure
Close the cooking compartment door.
3.

Appliance door

en
. With
).
"
).
"
19

Advertisement

Table of Contents
loading

Table of Contents