Using Cd-Rom Discs And Trays; Tray Loading And Operating - Plextor PX-40TSe Operation Manual

Using CD-ROM Discs
YOUR TASK:
YOUR OBJECTIVE:
YOUR METHOD:
1) While the drive is powered up, push the Eject button. The tray drawer
will slide out in 2–3 seconds.
2) Lay the bare CD into the depression in the tray, label side up. If the
drive is mounted in the horizontal position and the CD lays flat in the
drive, you do not need to use the
clips in the tray. If the drive is
mounted in the vertical position
(on its
perpendicular to the ground), the
clips should be gently pushed into
place over the CD so that it does
not fall out of the tray.
3) Press the Eject button again and
the tray will slide shut within 2–3
seconds.
NOTE: We recommend you use the Eject button to close the tray in a smooth
and secure manner. Closing the tray by pressing the front of the
drawer by hand is not recommended and risks damage or premature
wearing of the mechanism.
42
ULTRAPLEX 40X OPERATION MANUAL
— CHAPTER 10 —
and Trays
Learn how to handle, load, and care for your discs.
Protect your discs. Insert and eject discs properly so
your drive operates without interruption.
Practice loading discs into trays.

Tray Loading and Operating

side with the tray