Box Contents - Plextor PX-40TSe Operation Manual

YOUR TASK:
YOUR OBJECTIVE:
YOUR METHOD:
What you find in your Plextor box depends on two factors: 1) What
configuration you purchased; and 2) What the company that sold you the box
put in — or took out — while it was in their possession.
At the time of this manual's publication, Plextor sells its UltraPleX drives in
three configurations:
1) Drive only
2) Drive with SCSI Interface Kit
3) Drive with Mac Kit
The drive kit you received is indicated by a contents label applied to your
retail box.
Your drive may also have been integrated into a computer system or subsystem
sold by a third party.
PLEASE NOTE: A security sticker was applied to the top of your box. The
NOTE: If your drive came pre-installed in a computer, the rails, cables,
interface boards and other parts shown on the following pages may
have been installed and may not be separately available.
— CHAPTER 2 —

Box Contents

Check the contents of the box.
Make sure you got everything you paid for.
Compare what you find in the box with the tables on
the following pages.
contents of your box were carefully checked before this sticker
was applied. If it was cut before you purchased the box, you
should carefully check the contents to ensure nothing has
been removed. If something is missing, you should contact the
party from whom you purchased the box for an explanation.
There may be a perfectly good reason why the security sticker
on the box was cut before you received it. For example, a
dealer may have purchased a "Drive Only" configuration from
Plextor, then added a SCSI interface board and/or software
purchased separately before selling the box to you.
ULTRAPLEX 40X OPERATION MANUAL
3