Settings For Forwarding From Embedded Web Server Rx (Forward Settings) - Olivetti d-COPIA 4004MF Operation Manual

Using Convenient Fax Functions > Forward Settings
2
Settings for Forwarding from Embedded Web Server RX
(Forward Settings)
You can use Embedded Web Server RX on a computer connected to the network to specify the forwarding settings
on this machine.
Refer to the machine's Operation Guide for information on the network settings.
Accessing Embedded Web Server RX
1
2
8
Press the [▲] or [▼] key to select [Print].
9
Press the [OK] key.
Configure the function.
1
Press the [▲] or [▼] key to select [On] (print) or [Off] (do not print).
2
Press the [OK] key.
Display Embedded Web Server RX
1Open the web browser.
2
In the Address or Location bar, enter the machine's IP address as the URL, e.g.
192.168.48.21/.
The web page displays basic information about the machine and Embedded Web Server RX as
well as the current status of the machine.
Select settings in Embedded Web Server RX.
Select a category from the navigation bar on the left to view and set values for that particular
category.
If administrator privileges have been enabled on Embedded Web Server RX, remember to enter the
correct user name and password when trying to access the relevant screens.
For details, refer to the Embedded Web Server RX User Guide.
5-11