Fitting The Headset; Powering The Headset On And Off - Plantronics Voyager 510S User Manual

FITTING THE HEADSET

Slide the headset over
and behind your ear.
Then, press gently towards
your ear for a snug fit.
Adjust the microphone
position so that it is
directed towards your
mouth as illustrated.
POWERING THE HEADSET ON
AND OFF
To turn the headset on, press and hold
the power/mute button for 3 seconds
until the status indicator flashes blue.
To turn off, press and hold the button
again for 3 seconds until the status
indicator flashes red.
COMPATIBILITY WITH YOUR DESK TELEPHONE
It is very important that the configuration dial
on the base is positioned correctly. Audio
problems may be experienced if this is
incorrectly set. If you cannot hear a dial tone
through your headset, turn the configuration
dial until you obtain it. Then:
1. Make a call with your desk telephone
and, while speaking to the recipient,
2. Turn the configuration dial through the 4
positions.
BASIC INFORMATION
3. Select the position that provides the best
sound quality for both you and your
recipient.
4. During this call you should also adjust the
listen and speak volume as described on
page 8.
If you experience hissing/buzzing, or if
recipient can't hear you or you can't hear
them, repeat the steps above until you
achieve the best sound quality for both you
and the recipient. Once set, the configuration
dial will not require any further adjustment.
5