Fitting Your Headset - Plantronics DISCOVERY 640 User Manual

FITTING YOUR HEADSET

The Headset comes with 3 Soft Gel Ear Tips and
an Optional Ear Stabiliser. The medium-sized
Ear Tip is installed for wearing on the
right ear.
1. Twist the Ear Tip to the right for wearing on
the left ear.
2. Place the Headset into your ear with the
elongated side of the Ear Tip pointing up
and forward.
If the fit is not comfortable, either too tight or
too loose, remove the Ear Tip from the Headset
by turning the Ear Tip to the neutral* position
and pulling the Ear Tip away from the Headset.
1. Select the Ear Tip size that fits most
comfortably in your ear.
2. Hold the Ear Tip with the elongated edge
pointing down and push the Ear Tip post into
the opening on the Headset.
3. Twist the Ear Tip to the left for wearing on
the right ear or to the right for wearing on
the left ear.
4. Place the Headset into your ear with the
elongated side pointing up and forward.
8
USING THE OPTIONAL EAR STABILISER
The Ear Tip Stabiliser may be attached to the
Headset to improve stability.
1. Remove the Ear Tip from the Headset by
turning the Ear Tip to the neutral position*
and pulling the Ear Tip away from
the Headset.
2. Attach the Stabiliser in-between the Ear Tip
and the Headset.
3. Replace the Ear Tip.