Page 1
VOYAGER 510 ® BLUETOOTH HEADSET SYSTEM User Guide...
Page 2
WELCOME Voyager 510 Bluetooth ® Wireless Headset System User Guide Thank you for selecting the Voyager 510 Bluetooth ® Headset System from Plantronics. The Voyager™ 510 system offers wireless, hands-free headset convenience and workspace mobility. This user guide provides instructions on the installation and usage of your system.
Page 5
WELCOME DIAGRAM KEY BASE UNIT Tx Slide Switch (A-D) Rx Slide Switch (1-4) Speak Volume Adjust UP Speak Volume Adjust DOWN Call Control Button (Base) IntelliStand Switch ON/OFF Configuration Dial AC Power Adapter AC Power Adapter Port Handset Cable Port Telephone Cable Port Accessory Port Headset Docking Cradle...
Page 6
CONNECTING YOUR VOYAGER 510 SYSTEM OPTION – HANDSET LIFTER...
“Important Safety and Operational Information” booklet. Detailed technical information and a copy of the Declaration of Conformity can be found at www.plantronics.com/documentation CHARGING YOUR HEADSET The Status Indicator will be illuminated red while charging and change to blue when the headset is fully charged.
WELCOME 45cm 30cm 15cm POSITIONING YOUR SYSTEM Positioning: Recommended separation distance. Important: Incorrect positioning can cause problems with noise and interference.
Page 9
POWERING THE HEADSET ON & OFF To turn the headset on press in and hold the Power/Mute Button for 3 seconds until the Status Indicator flashes blue. To turn off, press and hold the button again for 3 seconds until the Status Indicator flashes red. COMPATIBILITY WITH YOUR TELEPHONE It is very important that the Configuration Dial is positioned correctly.
Dial using your telephone keypad or voice-dialling (if supported by your telephone). Important: You will first need to pair the headset to your mobile handset. Refer to the instructions on Pairing in the Voyager 510 Headset Quickstart Guide. ANSWERING A CALL If the corded telephone is ringing press the Call Control button on the headset (A) or on the base.
LISTEN VOLUME Adjust the Listen Volume (how others sound to you) to a comfortable level. If you cannot find a comfortable Listen level, try different settings on the Rx Slide Switch (1-4) as shown until a satisfactory sound level is experienced. Note: This setting only adjusts the headset listen level on calls placed using the corded telephone and cannot adjust the headset Listen Volume when used with a mobile handset.
MUTE BUTTON To mute a call, short press (<1 sec) the Power/Mute Button once. To take the call off mute, short press (<1 sec) the button again.
Page 13
OPERATION WITH THE HANDSET LIFTER ACCESSORY The Plantronics Handset Lifter is an accessory that can be purchased for use with Plantronics Wireless Headset Systems. It has two functions: 1. To automatically notify you when an incoming call is detected even when you are away from your desk.
Page 14
Plantronics Handset Lifter, you can enable the IntelliStand™ feature. The IntelliStand™ senses when the headset has been removed or replaced in the Voyager 510 System Base unit, automatically activating the lifter to answer or end a call. The IntelliStand™ feature is disabled when the switch is in position I (as shown) or enabled when the switch is in position II.
The call will be re-established on walking back in range If you remain out of range for more than 10 minutes the system will drop the call permanently. If using a Plantronics Handset Lifter the handset will be replaced and the call terminated.
The Voyager 510 Bluetooth ® Unit factory paired to each other. However, if you have purchased a Voyager 510 System Base Unit or if you wish to use a replacement headset with your existing base unit the units must be paired as follows: 1.
OPTIONAL PARTS & ACCESSORIES There are a range of Plantronics accessories designed to enhance the functionality of your Voyager 510 Bluetooth for further details. HL10 Telephone Handset Lifter On-Line Indicator On-Line Indicator Extension Cable Accessory Converter Cable AC Power Adapter (UK only)
Page 18
MODEL AND COUNTRY INFORMATION See package for product model number and refer to the table below for approved used. 67890-07 67892-07 67890-04 67892-04 67890-01/02 67892-01/02 67890-09 67892-09 AUT, BEL, DEU, DNK, ESP , FRA, GBR, GRC, ITA, IRL, LUX, NLD, PRT, SWE, FIN, CYP , CZE, EST, HUN, LVA, LTU, MLT, POL, SVK, SVN.
Check that the AC Power Adapter is connected to the mains supply. Check that the AC Power Adapter is the model supplied by Plantronics. Solution Turn it on by pressing in and holding the Power/ Mute Button for approximately 3 seconds, until the Status Indicator flashes blue.
Page 20
Check that the telephone is connected to the base unit’s Telephone Cable Port. Check that the handset is connected to the base unit’s Handset Cable Port. Call your supplier or local Plantronics office for help. Reconnect the handset to the telephone and test.
Page 21
PROBLEM Receive sounds distorted. Possible Cause Speak volume is too high Reduce speak volume by changing the Tx Slide Listen volume too high on your telephone PROBLEM I can hear too much background conversation, noise or sidetone. Possible Cause Speak volume is too high Lower the speak volume by adjusting the Speak PROBLEM My handset Lifter operates every time I remove or replace my headset in the base unit.