PACKAGE CONTENTS WELCOME This User Guide provides instructions on the setup and usage of the Plantronics Voyager 510 USB Bluetooth headset system. Before getting started, please review the safety booklet included in your package. For additional help, service or support information, refer to the product warranty card or visit www.plantronics.com.
FEATURES CHARGING Horizontal boom adjustment Call control button Charge connection Status indicator light Noise-Cancelling microphone with WindSmart technology ® USB charging Power/mute button Listen volume adjust button +/- Ear tip Pairing/connect button USB charging with charging stand Indicator light Before using, you must first charge your headset. The indicator light flashes red while charging and turns solid blue when the headset is fully charged.
(volume up) and the call control for Bluetooth devices and select “510 button. Release the buttons when the Plantronics”. indicator light begins to flash red then blue. 3. When prompted for password, enter 0000.
PAIRING INSTALLING PERSONO SUITE SOFTWARE Plantronics PerSono Suite software provides the link between your Bluetooth headset and Pairing headset compatible softphone applications on your computer. PerSono Suite software provides the with USB Bluetooth adapter ability to remotely detect and answer/end a call from your softphone application via the headset call control button.
ADJUSTING FIT Inserting a new ear tip Wearing the headset Rotate the microphone horizontally and vertically as illustrated, to select for left or right ear wearing. The illustration shows conversion from right to left ear wearing. Reverse the procedure to convert from left to right ear wearing. Replacing the ear tip Slide the headset over and behind your ear.
When you hear a further tone, the last Check the PerSono Suite compatibility list at www.plantronics.com/SoftphoneCompatibility Switching a call from headset to phone number has been redialled. for the most current information on softphone compatibility.
USING YOUR HEADSET INDICATOR LIGHTS Adjusting volume Headset indicator lights Headset status Light Power Flashes blue Charging Flashes red Fully charged Solid blue Battery low Flashes red Pairing Flashes red and blue To increase listening volume, press the upper end (+) of the volume button. To decrease listening volume, press the lower end (-).
• Headset battery needs to be charged. See page 5. • The USB Bluetooth adapter is not set as the default voice device. Use the Voice settings in Windows under Sounds and Voice Devices ® to select “Plantronics BT Adapter” as the voice device.
Suite, and Sound Innovation are trademarks or registered trademarks of Plantronics, Inc. The Bluetooth name and the Bluetooth trademarks are owned by Bluetooth SIG, Inc. and are used by Plantronics, Inc. under licence. Windows is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries.
Need help?
Do you have a question about the VOYAGER 510-USB and is the answer not in the manual?
Questions and answers