Headset Set-Up; Fitting Headset; Docking And Charging The Headset - Plantronics Savi WT100/T User Manual

3 Headset set-up

3.1 Fitting headset

The headset comes with a pre-installed ear loop. An optional
headband is also provided.
1 to install the headband, gently unsnap the pre-installed
ear loop from the headset.
2
Snap the headband into the headset. The headband can
be adjusted to fit.
3 For either wearing option, rotate the headset until the
microphone is pointed towards your mouth.
4
the headset can be converted for wearing on the left or
right ear with both ear loop and headband.
Ear loop
Plantronics Savi User Guide
Headset
Snap
Headband

3.2 Docking and charging the headset

1
Gently push the headset into the charging cradle.
The indicator light on the headset will be solid red to indicate
that the headset battery is charging
2 Charge for at least 20 minutes prior to the first use.
A full charge takes 3 hours.
Indicator light
CHArgIng TIMe
20 min .....................
Minimum charge
before first use
3 hours ...................
Full charge
8