Turning Power On/Off; Turning On The Main Power; Turning Power On - Sharp PN-70TW3 Operation Manual

Caution
• Turn on the monitor first before turning on the computer or
playback device.
• To keep the performance of the wireless controller stable, put
the monitor in the Power off (Standby mode) state once a day.
• When switching the main power switch or the POWER
button off and back on, always wait for at least 5 seconds.
A short interval may result in a malfunction.

Turning on the main power

Main power switch
Caution
• The main power must be turned on/off with the main power
switch. Do not connect/disconnect the power cord or turn
the breaker on/off while the main power switch is on.
• For a complete electrical disconnection, pull out the main
plug.
18
E

Turning Power On/Off

Turning power on

1. Press the POWER button.
POWER button / Power LED
Status
Green lit
Orange lit
Green flashing
TIPS
• When the main power switch is off, the monitor cannot be
turned on.
• If the monitor is in input signal waiting mode and you press
the POWER button, the monitor enters standby mode.
• Setting the SCHEDULE flashes the power LED alternately
in red and orange in standby mode.
• To disable the logo screen from displaying when turning the
power ON, set LOGO SCREEN to OFF on the OTHERS
menu. (See page 37.)
• You can fix the input mode that appears after startup. Set
START INPUT MODE on the SETUP menu.
Status of the monitor
Power on
Power off (Standby mode)
Input signal waiting mode