Advertisement

Quick Links

PN-70TH5 Dismantle Instruction
LCD MONITOR
PN-70TH5
MODEL
Dismantle Instruction
1

Advertisement

Table of Contents
loading

Summary of Contents for Sharp PN -70TH5

  • Page 1 PN-70TH5 Dismantle Instruction LCD MONITOR PN-70TH5 MODEL Dismantle Instruction...
  • Page 2: Table Of Contents

    PN-70TH5 Dismantle Instruction Table of contents 1. Scope ........................3 2. Tools for dismantling ....................3 3. Dismantle Procedure ....................3 4. Back covers ......................4 5. Printed circuit boards ....................5 6. Battery ........................ 6 7. LCD Module ......................7 8.
  • Page 3: Scope

    PN-70TH5 Dismantle Instruction 1. Scope This document describes dismantling instruction according to Annex VII of Directive 2012/19/EU. 2. Tools for dismantling Below tools are required to dismantle this product. Screw Driver Nipper 3. Dismantle Procedure This product can be dismantled by below steps. 1.
  • Page 4: Back Covers

    PN-70TH5 Dismantle Instruction 4. Back covers 2 back covers (right/left) can be removed by screw driver.
  • Page 5: Printed Circuit Boards

    PN-70TH5 Dismantle Instruction 5. Printed circuit boards All PWBs can be removed by screw driver. Main I/F PWB (1pcs) Power PWB (1pcs) Touch PWB 1(1pcs) Touch PWB 2 (1pcs) Conversion PWB (1pcs) FFC relay PWB (1pcs) AC Relay PWB (1pcs) 5V Power PWB (1pcs) T-CON PWB (1pcs) Key PWB (1pcs)
  • Page 6: Battery

    PN-70TH5 Dismantle Instruction 6. Battery This model uses CR2032 Lithium Coin battery on Main I/F PWB and AAA battery for remote control. Battery can easily be removed from the battery holder.
  • Page 7: Lcd Module

    PN-70TH5 Dismantle Instruction 7. LCD Module LCD Dismantle procedure After you have removed the PWB´s and dismantled the LCD Module please take out the cables from the LCD module. Due to direct bonding technology the front glass cannot be removed from the LCD.
  • Page 8: Capacitors

    PN-70TH5 Dismantle Instruction 8. Capacitors Electrolyte Capacitors which diameter/height is larger than 25mm is installed on Power PWB, LED driver PWB and 5V Power PWB. These capacitors can be removed by using nipper to cut the leads. On Power PWB On 5V Power PWB...
  • Page 9: Parts List

    PN-70TH5 Dismantle Instruction 9. Parts List Parts described in Annex VII of directive 2012/19/EU are as below. Parts Note 70inch LCD module Printed Circuit Boards Main I/F PWB Power PWB Touch PWB 1 Touch PWB 2 Conversion PWB FFC Relay PWB AC Relay PWB 5V Power PWB Key PWB...

Table of Contents