Table of Contents
Advertisement
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Using the alignment posts, place the I/O board on the palm rest and keyboard assembly.
2
Replace the two screws (M2x4) that secure the I/O board to the palm rest and keyboard assembly.
3
Adhere the I/O-board cable to the palm rest and keyboard assembly.
4
Connect the hard-drive cable to the system board and close the latch to secure the cable.
5
Connect the I/O-board cable to the system board and close the latch to secure the cable.
Post-requisites
1
Replace the speakers.
2
Replace the
solid-state
drive.
3
Replace the
base
cover.
computer. After working inside your computer, follow the instructions in
Replacing the I/O board
27
After working inside
www.dell.com/
Replacing the I/O board
51
Advertisement
Table of Contents
