Table of Contents
Advertisement
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Remove the
base
cover.
2
Remove the battery.
3
Remove the
memory
modules.
4
Remove the
wireless
card.
5
Remove the
thermal
plate.
6
Remove the
solid-state
drive.
7
Remove the
hard
drive.
8
Remove the
display
assembly.
9
Remove the
system
board.
Procedure
1
Remove the screw (M2x2) that secures the power-adapter port to the palm rest and keyboard assembly.
2
Peel off the power-adapter port cable from the palm-rest and keyboard assembly.
3
Lift the power-adapter port, along with its cable, off the palm rest and keyboard assembly.
Removing the power-adapter port
computer. After working inside your computer, follow the instructions in
After working inside
www.dell.com/
Removing the power-adapter port
36
69
Advertisement
Table of Contents
