WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Align the notch on the memory module with the tab on the memory-module slot.
2
Slide the memory module firmly into the slot at an angle.
3
Press the memory module down until it clicks into place.
NOTE:
If you do not hear the click, remove the memory module and reinstall it.
Post-requisites
Replace the
base
cover.
26
Replacing the memory modules
Replacing the memory modules
computer. After working inside your computer, follow the instructions in
After working inside
www.dell.com/
11