Table of Contents
Advertisement
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Remove the
base
cover.
2
Remove the
wireless
card.
3
Remove the
thermal
plate.
4
Remove the
display
assembly.
5
Remove the
display
bezel.
Procedure
1
Using a plastic scribe, gently pry the camera off the display back-cover and antenna assembly.
2
Disconnect the camera cable from the camera module.
3
Lift the camera module from the display back-cover and antenna assembly.
computer. After working inside your computer, follow the instructions in
Removing the camera
www.dell.com/
Removing the camera
42
After working inside
81
Advertisement
Table of Contents
