Table of Contents
Advertisement
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Connect the camera cable to the camera module.
2
Using the alignment post, adhere the camera module on the display back-cover and antenna assembly.
Post-requisites
1
Replace the
display
bezel.
2
Replace the
display
assembly.
3
Replace the
thermal
plate.
4
Replace the
wireless
card.
5
Replace the
base
cover.
computer. After working inside your computer, follow the instructions in
Replacing the camera
www.dell.com/
Replacing the camera
43
After working inside
83
Advertisement
Table of Contents
